PERMASEAM™

Excellent adhesion on most any roof surfaces including: weathered wood, shakes, plywood, clapboard, primed metal, galvanized, aluminum, tin, copper, asbestos, asphalt, urethane, polyester, styrofoam, adobe, brick, stucco, concrete, clay, masonry, slate, slab, built-up-roofs, modified bitumen membranes, rolled roofing, mineral surfaced roofing and various other substrates.
For use on residential, commercial and industrial applications.

For top-quality metallic roof paint and steel roof paint, Nationwide Coatings offers a comprehensive range of roofing paint for metal surfaces. Our products include roof paint for metal roofs, metal roof sealers, and waterproofing paint for metal roofs. Whether you need a metal roof paint and sealer, metal roof sealant paint, or a spray metal roof coating, we have you covered. Our colored metal roof paint and roof paint sealants are perfect for enhancing and protecting your roof. We also provide galvanized roof coatings, steel roofing paint, and solutions to seal rusty metal. As one of the leading paint manufacturers in the US, we ensure the best white roof coating and metal roof sealant. Explore our range of roof hole sealers, waterproof metal sealants, and paint for barn roofs. Our roof coating sprays, metal primer rust solutions, and paint on roof sealants are designed for durability and performance. Choose Nationwide Coatings for all your roofing coating materials and metal roof sealing needs.

SURFACE PREPARATION:
For proper adhesion it is essential that the surface is prepared properly. Clean Exterior Surfaces by thoroughly pressure washing with a water and chlorine solution using at least 1500 P.S.I. to remove any previous coatings, dirt, grease, and other foreign materials, especially mold, mildew and algae. PERMASEAM™ will resist mildew growth but will not kill mildew already on the surface. Rinse thoroughly. Remove loose paint and powdery substances. Patch any holes, cracks, seams, imperfections, etc. that exceed 1/16 of an inch, with PERMAPATCH™, Waterproofing Caulk & Sealant.

Metal:
Clean surface of all grease, oil and foreign matter before priming. Rusted metal and uncoated metal must be primed with METAL-PRIME™, a Red Iron Oxide Primer Sealer. Use a degreaser on galvanized or coated metals which have oils or surface. treatments. Check PERMASEAM™ adhesion on galvanized or coated metal by applying to a small area and evaluating after 48 hours. If lack of adhesion is present after evaluating, metal must be lightly scuffed without penetrating the coated finish or galvanizing. If applicable, use METAL-PRIME™ to spot prime the penetrated areas, then use PERMASEAM™ for area to be coated.

APPLICATION PROCEDURE:
Stir well before using. Do not thin, use product as is. Do not apply when temperatures are below 45 degrees Fahrenheit or when humidity is very high. Do not apply when coating will be subjected to rain or heavy dew before it has had enough time to dry (approx. 2 to 4 hours). Drying time will vary depending on temperature, humidity and location. Apply using brush or roller. Spread primer uniformly sealing seam and surrounding areas. Spread Rate will vary depending on substrate. Apply PERMASEAM™ at least 16 mils wet film thickness. Check seams after application and apply additional coats if necessary. Wait at least 6 hours before applying additional coats or a compatible primer, paint or coating.

APPLICATION HINT:
Puncture pour holes in five-gallon pails and pour a liberal bead directly on seam and follow with roller to distribute to seam and surrounding areas.

CLEAN UP:
Clean up all spills, tools and overspray immediately while the coating is still wet with warm soapy water.