Nationwide Coatings®
The
PERM
anent Coating Solution™
The Industry Leader in ELASTOMERIC Waterproofing Insulating Ceramic Paints and Coatings
Exterior Ceramic Paints
Enhance your home or building with exterior ceramic paints, primers, and specialty sealers. Designed for lasting durability, weather resistance, and beautiful finishes, our ceramic paint solutions help protect exterior walls, stucco, masonry, trim, and other surfaces. Any Color Available.
ULTRA CLEAR™
2700
Acrylic Clear Sealer for Preserving, Protecting & Waterproofing Wall & Other Surfaces. 7 Year Written Warranty.
CERAMIC FORCE® Paint
25xx
Acrylic Insulating Ceramic Exterior High Hide Paint. Flat, Satin and Semi-Gloss. Walls and Trim. 15 Year Written Warranty.
CERAMIC FORCE® Primer
2590
Acrylic Insulating Ceramic Exterior Primer Sealer. High Resin Concentration Formula. Walls and Trim.
ENVIRO-4000® Paint
20xx
Zero V.O.C. Acrylic Insulating Ceramic Exterior Paint. Flat, Satin and Semi-Gloss Finishes. 15 Year Written Warranty.
ENVIRO-4000® Primer
2090
Zero V.O.C. Acrylic Exterior Wall and Trim Ceramic Paint Primer Sealer. Low Odor.
WEATHER GUARD™
5750
Acrylic Insulating Ceramic Waterborne DTM Enamel Paint. Trim, Windows, Doors & Other Surfaces. 10 Year Written Warranty.
ULTRA FORCE™
2925
Acrylic Hybrid Elastomeric Waterproofing Insulating Ceramic Low Luster Wall Coating. Any Color Available. 15 Year Written Warranty.
SUPER CERAMIC ONE KOTE™
2930
Acrylic Insulating Ceramic One Coat High Hide Low Luster Waterproofing House Paint. 10 Year Written Warranty.
Need help choosing?
We make a lot of products. Tell us about your project and we’ll match the right one.
METALUX™ ENAM
4075
100% Acrylic Latex Ceramic Enamel Metallic Look Decorative Finish Paint. 10 Year Written Warranty.
STUKKOPATCH™
2740
Elastomeric Waterproofing Stucco Repair Compound, Patch, Crack Sealer & Caulk for Stucco, Cement and Other Surfaces.
METAL-PRIME™
5790
Elastomeric Water Based Red Iron Oxide High Solids, Zinc Rich, Waterproofing Rust Treatment Metal Primer & Sealer.
SUPER BLOCK™
2585
High Solids Alkyd Acrylic Waterborne White Primer Sealer & Stain Blocker. Interior or Exterior Use.
SUPER BOND™
2575
Acrylic Extreme Bonding Clear Adhesive Primer. Bonds to Most Surfaces: Plastics, Glass, Fiberglass, Rubber and Metals.
CHALK FORCE™
2595
Acrylic Primer Sealer and Surface Conditioner that Prepares Most High pH (Fresh Cement/Stucco) & Chalky Surfaces.
ULTRA LOK™
2785
Acrylic Elastomeric Waterproofing Adhesive Bonding Primer Sealer for High pH Masonry and Cement Surfaces.
ENCAPSULGUARD™
4000
Acrylic Elastomeric Encapsulment Coating for an Effective and Safe Sealing of Lead Based Paints, Asbestos and Other Materials.
DIAMOND DUST™
9600
Clear Mica Sparkle Chips for Adding a Sparkle/Glitter Effect. Applied to the Wet Surface of Most Paint or Coating. Machine or Manual Application.
FLEXPATCH™
7541
Wood Filler, Caulk & Sealant Elastomeric Waterproofing High Solids Trowel or Brush Grade, Tan Color. Minimal Shrinkage.
NWX BLOCK FILLER™
2794
Acrylic Ceramic High Build Block Filler & Sealer. Available in Textured or Non-Textured Flat Finishes.
EXCLUSIVITY: Some Nationwide Products are sold Exclusively by Dealers and/or Distributors in Select Areas and Regions.
LEAKS: Leaks resulting from acts of providence, owner or their agents, are not the responsibility of NPCMI and under no circumstances shall NPCMI be liable in any respects to the building, it’s occupants, it’s contents or for any consequential or incidental damages. Leaks are required to be repaired prior to the application of any coating and therefore are not covered under any warranty. NPCMI does not warranty or guarantee for any Past, Present or Future Leaks. Leaks must be fixed and/or repaired prior to the application of any paint, coating or other product purchased from NPCMI.
LABOR: Products Warranties are Limited to Material Only (see Limitations below), Labor is not included. Nationwide does not Warranty for Labor of any Kind.
LIMITATIONS: No express or implied warranty is made for any product for its merchantability, suitability, or fitness for a particular use or purpose, and any warranty provided is limited in scope and duration to the express warranty provided by each individual product’s Warranty. If no duration of time for a Warranty is stated for a specific product then the maximum warranty shall be the lesser of (i) one year from date of purchase and (ii) the shortest period required by applicable law. If a product has an express Warranty and such Warranty was not registered with NPCMI by using a Warranty Registration Certificate, the maximum warranty duration will be one year from date of purchase. NPCMI shall not be liable for incidental or consequential damages, including, but not limited to, lost profits or earnings, or for damage to any building on which NPCMI product is applied, such building’s contents, or such building’s occupants. NPCMI's liability is limited to the reasonable replacement cost of product that has been fully paid for and shall be limited to defective product in the affected area only, whether any claim against it is based upon strict liability, negligence, breach of warranty, or any other theory or cause of action. Exclusive venue and jurisdiction for any claim with regards to any product of NPCMI or its related Warranty shall be in the State of Florida Court sitting in Manatee County, Florida, U.S.A.
The use of any products not purchased from Nationwide Protective Coating Manufacturers, Inc. used in association with NPCMI products will void any warranties by NPCMI, unless agreed to in writing by NPCMI prior to application of NPCMI products.
DISCLAIMER: Information presented on this Web Page or any other Web Page on Nationwide Protective Coating Mfrs., Inc. Web Site has been compiled by sources to be reliable, and is accurate and reliable to the best of our knowledge and belief, but is not guaranteed to be so.
DISCLAIMER VOCs: Any mention of the terms “ZERO V.O.C.” “V.O.C. FREE” or “NO V.O.C.” means that analytical results of testing on representative products show VOC levels measured at less than 5 grams per liter +/- 5%. Any mention of the term “LOW V.O.C.” means that analytical results of testing on representative products show VOC levels measured at less than 50 grams per liter +/- 5%.
Website Privacy Policy
US Owned and Operated WEB SITE OWNER: NATIONWIDE PROTECTIVE COATING MANUFACTURERS, INC.® 2026 - All Copyrightable Rights Reserved - Website Version L7-1.0
LEAKS: Leaks resulting from acts of providence, owner or their agents, are not the responsibility of NPCMI and under no circumstances shall NPCMI be liable in any respects to the building, it’s occupants, it’s contents or for any consequential or incidental damages. Leaks are required to be repaired prior to the application of any coating and therefore are not covered under any warranty. NPCMI does not warranty or guarantee for any Past, Present or Future Leaks. Leaks must be fixed and/or repaired prior to the application of any paint, coating or other product purchased from NPCMI.
LABOR: Products Warranties are Limited to Material Only (see Limitations below), Labor is not included. Nationwide does not Warranty for Labor of any Kind.
LIMITATIONS: No express or implied warranty is made for any product for its merchantability, suitability, or fitness for a particular use or purpose, and any warranty provided is limited in scope and duration to the express warranty provided by each individual product’s Warranty. If no duration of time for a Warranty is stated for a specific product then the maximum warranty shall be the lesser of (i) one year from date of purchase and (ii) the shortest period required by applicable law. If a product has an express Warranty and such Warranty was not registered with NPCMI by using a Warranty Registration Certificate, the maximum warranty duration will be one year from date of purchase. NPCMI shall not be liable for incidental or consequential damages, including, but not limited to, lost profits or earnings, or for damage to any building on which NPCMI product is applied, such building’s contents, or such building’s occupants. NPCMI's liability is limited to the reasonable replacement cost of product that has been fully paid for and shall be limited to defective product in the affected area only, whether any claim against it is based upon strict liability, negligence, breach of warranty, or any other theory or cause of action. Exclusive venue and jurisdiction for any claim with regards to any product of NPCMI or its related Warranty shall be in the State of Florida Court sitting in Manatee County, Florida, U.S.A.
The use of any products not purchased from Nationwide Protective Coating Manufacturers, Inc. used in association with NPCMI products will void any warranties by NPCMI, unless agreed to in writing by NPCMI prior to application of NPCMI products.
DISCLAIMER: Information presented on this Web Page or any other Web Page on Nationwide Protective Coating Mfrs., Inc. Web Site has been compiled by sources to be reliable, and is accurate and reliable to the best of our knowledge and belief, but is not guaranteed to be so.
DISCLAIMER VOCs: Any mention of the terms “ZERO V.O.C.” “V.O.C. FREE” or “NO V.O.C.” means that analytical results of testing on representative products show VOC levels measured at less than 5 grams per liter +/- 5%. Any mention of the term “LOW V.O.C.” means that analytical results of testing on representative products show VOC levels measured at less than 50 grams per liter +/- 5%.
Website Privacy Policy
US Owned and Operated WEB SITE OWNER: NATIONWIDE PROTECTIVE COATING MANUFACTURERS, INC.® 2026 - All Copyrightable Rights Reserved - Website Version L7-1.0