Nationwide Protective Coating Mfrs., Inc.
The
PERM
anent Coating Solution™
The Industry Leader in ELASTOMERIC Waterproofing Insulating Ceramic Paints and Coatings
Floor Sealers, Stains and Coatings
Floor sealers, stains and coatings for wood, concrete, and composite surfaces. Our products include elastomeric deck coatings, wood sealers, and concrete floor systems with anti-skid options. Designed for long-lasting protection, they resist wear and weather while offering customizable finishes.
DECK GUARDIAN™
5625
Elastomeric Deck Coating & Paint with Urethane for Wood, Concrete, Composite & Other Surfaces such as Patios, Pool Decks & Lanais.
WOOD-TECH™
5675
Acrylic Waterborne Penetrating Wood Sealer. Clear Gloss, Full or Semi-Transparent Color Stain Finish. Any Color Available.
FLEXPATCH™
7541
Wood Filler, Caulk & Sealant Elastomeric Waterproofing High Solids Trowel or Brush Grade Tan. Minimal Shrinkage.
PAVER SEALER™
5897
Acrylic Water Based High-Performance Semi-Gloss Crystal Clear Sealer that Penetrates and Protects all Types of Porous Decorative Pavers.
ULTRATHANE™
5840
100% Urethane with 40% Active Solids High Performance Protective Clear Coating & Sealer.
DECK GUARD SKID-TEX™
5626
Anti-Skid / Anti-Slip Texture Additive for Use with Deck Guardian High Build Elastomeric Deck Coating Reducing Slip and Skid.
ACRATHANE™
5875
Acrylic Concrete Penetrating Paint, Stain & Sealer. Commercial Grade. Concrete & Other Surfaces. Any Color Available.
ACRACLEAR™
5895
Acrylic Penetrating Clear Sealer. Commercial Grade. Excellent Hot Tire Pickup Resistance. Concrete & Other Surfaces.
SKID-EX™
9250
Anti-Skid & Anti-Slip Additive for use in Latex Clear Coats, Paints or Stains for Reducing Slip & Skid on Floors.
PERMAPATCH™
7540
Acrylic Elastomeric Waterproofing High Solids Trowel or Brush Grade Roof, Wall & Floor White Caulk & Sealant. Minimal Shrinkage.
FLOOR GRIP™ ADDITIVE
9252
Clear Polypropylene Anti-Skid Anti-Slip Floor and Deck Coating Additive. Excellent Grip without a Gritty or Sandy Looking Surface.
EXCLUSIVITY: Some Nationwide Products are sold Exclusively by Dealers and/or Distributors in Select Areas and Regions.
LEAKS: Leaks resulting from acts of providence, owner or their agents, are not the responsibility of NPCMI and under no circumstances shall NPCMI be liable in any respects to the building, it’s occupants, it’s contents or for any consequential or incidental damages. Leaks are required to be repaired prior to the application of any coating and therefore are not covered under any warranty. NPCMI does not warranty or guarantee for any Past, Present or Future Leaks. Leaks must be fixed and/or repaired prior to the application of any paint, coating or other product purchased from NPCMI.
LABOR: Products Warranties are Limited to Material Only (see Limitations below), Labor is not included. Nationwide does not Warranty for Labor of any Kind.
LIMITATIONS: No express or implied warranty is made for any product for its merchantability, suitability, or fitness for a particular use or purpose, and any warranty provided is limited in scope and duration to the express warranty provided by each individual product’s Warranty. If no duration of time for a Warranty is stated for a specific product then the maximum warranty shall be the lesser of (i) one year from date of purchase and (ii) the shortest period required by applicable law. If a product has an express Warranty and such Warranty was not registered with NPCMI by using a Warranty Registration Certificate, the maximum warranty duration will be one year from date of purchase. NPCMI shall not be liable for incidental or consequential damages, including, but not limited to, lost profits or earnings, or for damage to any building on which NPCMI product is applied, such building’s contents, or such building’s occupants. NPCMI's liability is limited to the reasonable replacement cost of product that has been fully paid for and shall be limited to defective product in the affected area only, whether any claim against it is based upon strict liability, negligence, breach of warranty, or any other theory or cause of action. Exclusive venue and jurisdiction for any claim with regards to any product of NPCMI or its related Warranty shall be in the State of Florida Court sitting in Manatee County, Florida, U.S.A.
The use of any products not purchased from Nationwide Protective Coating Manufacturers, Inc. used in association with NPCMI products will void any warranties by NPCMI, unless agreed to in writing by NPCMI prior to application of NPCMI products.
DISCLAIMER: Information presented on this Web Page or any other Web Page on Nationwide Protective Coating Mfrs., Inc. Web Site has been compiled by sources to be reliable, and is accurate and reliable to the best of our knowledge and belief, but is not guaranteed to be so.
DISCLAIMER VOCs: Any mention of the terms “ZERO V.O.C.” “V.O.C. FREE” or “NO V.O.C.” means that analytical results of testing on representative products show VOC levels measured at less than 5 grams per liter +/- 5%. Any mention of the term “LOW V.O.C.” means that analytical results of testing on representative products show VOC levels measured at less than 50 grams per liter +/- 5%.
Website Privacy Policy
US Owned and Operated WEB SITE OWNER: NATIONWIDE PROTECTIVE COATING MANUFACTURERS, INC.® 2025 - All Copyrightable Rights Reserved - Website Version L7-1.0
LEAKS: Leaks resulting from acts of providence, owner or their agents, are not the responsibility of NPCMI and under no circumstances shall NPCMI be liable in any respects to the building, it’s occupants, it’s contents or for any consequential or incidental damages. Leaks are required to be repaired prior to the application of any coating and therefore are not covered under any warranty. NPCMI does not warranty or guarantee for any Past, Present or Future Leaks. Leaks must be fixed and/or repaired prior to the application of any paint, coating or other product purchased from NPCMI.
LABOR: Products Warranties are Limited to Material Only (see Limitations below), Labor is not included. Nationwide does not Warranty for Labor of any Kind.
LIMITATIONS: No express or implied warranty is made for any product for its merchantability, suitability, or fitness for a particular use or purpose, and any warranty provided is limited in scope and duration to the express warranty provided by each individual product’s Warranty. If no duration of time for a Warranty is stated for a specific product then the maximum warranty shall be the lesser of (i) one year from date of purchase and (ii) the shortest period required by applicable law. If a product has an express Warranty and such Warranty was not registered with NPCMI by using a Warranty Registration Certificate, the maximum warranty duration will be one year from date of purchase. NPCMI shall not be liable for incidental or consequential damages, including, but not limited to, lost profits or earnings, or for damage to any building on which NPCMI product is applied, such building’s contents, or such building’s occupants. NPCMI's liability is limited to the reasonable replacement cost of product that has been fully paid for and shall be limited to defective product in the affected area only, whether any claim against it is based upon strict liability, negligence, breach of warranty, or any other theory or cause of action. Exclusive venue and jurisdiction for any claim with regards to any product of NPCMI or its related Warranty shall be in the State of Florida Court sitting in Manatee County, Florida, U.S.A.
The use of any products not purchased from Nationwide Protective Coating Manufacturers, Inc. used in association with NPCMI products will void any warranties by NPCMI, unless agreed to in writing by NPCMI prior to application of NPCMI products.
DISCLAIMER: Information presented on this Web Page or any other Web Page on Nationwide Protective Coating Mfrs., Inc. Web Site has been compiled by sources to be reliable, and is accurate and reliable to the best of our knowledge and belief, but is not guaranteed to be so.
DISCLAIMER VOCs: Any mention of the terms “ZERO V.O.C.” “V.O.C. FREE” or “NO V.O.C.” means that analytical results of testing on representative products show VOC levels measured at less than 5 grams per liter +/- 5%. Any mention of the term “LOW V.O.C.” means that analytical results of testing on representative products show VOC levels measured at less than 50 grams per liter +/- 5%.
Website Privacy Policy
US Owned and Operated WEB SITE OWNER: NATIONWIDE PROTECTIVE COATING MANUFACTURERS, INC.® 2025 - All Copyrightable Rights Reserved - Website Version L7-1.0