Nationwide Protective Coating Mfrs., Inc.
The
PERM
anent Coating Solution™
The Industry Leader in ELASTOMERIC Waterproofing Insulating Ceramic Paints and Coatings
METAL-PRIME™
5790
100% Acrylic Elastomeric Red Iron Oxide High Solids, Zinc Rich, Waterproofing Rust Treatment Metal Primer & Sealer.
PERMABOND™
7595
100% Acrylic Elastomeric Waterproofing Adhesive Bonding Primer Sealer. Forms a Tacky Finish to Provide a Tight Bond to Elastomeric Roof Coatings.
SUPER BOND™
2575
100% Clear Acrylic Extreme Bonding Adhesive Primer. Bonds to Most Surfaces: Plastics, Glass, Fiberglass, Rubber and Metals.
BUS-PRIME™
7790
Elastomeric Adhesive Waterproofing Transparent White Bus & Recreational Vehicle Primer. Excellent Adhesion & Bonding.
PERMAPATCH-NYLON™
7540N
Elastomeric Waterproofing High Solids Nylon Reinforced Roof, Wall and Floor White Caulk and Sealant. Minimal Shrinkage.
PERMAPATCH™
7540
100% Acrylic Elastomeric Waterproofing High Solids Trowel or Brush Grade Roof, Wall & Floor White Caulk & Sealant. Minimal Shrinkage.
PERMAMAT™
95xx
Spunbonded Polyester Fabric Matting for Large Leak Repairs or New Roof Applications. Permanently Seals and Waterproofs Large Areas or Entire Roof Surfaces.
PERMATAPE™
95xx
Spunbonded Polyester Fabric Tape Permanently Seals Problem Areas Prone to Leaking Such as Seams, Flashings, Cracks, Vents, Valleys, etc.
PERMASTIK™
9500
Fleece Backed Self Adhesive Repair and Flashing Tape Designed for a Variety of Roofing and Waterproofing Repairs.
PERMAPRIME™
7594
100% Acrylic Elastomeric Waterproofing Insulating Ceramic. Forms a Quick Drying Gray Primer Finish for Elastomeric Roof Coatings.
PERMABOND™ FREE
7596
100% Acrylic Elastomeric Zero V.O.C. Waterproofing Adhesive Bonding Primer Sealer. Forms a Tacky Finish to Provide a Tight Bond to Elastomeric Roof Coatings.
TREAD KOTE™
4195
100% Acrylic Elastomeric Rubberized Coating Designed for Roof Maintenance Walkways, but can be Used for Barn Stalls, Floors & More.
PERMAGRIP™
7597
Transparent Clear, Elastomeric Adhesive Waterproofing Bonding Primer and Wet Area Coating and Fabric Saturant.
PERMASEAM™
7591
Liquid Quick Seam Sealer and Primer. Nylon and Fiberglass Reinforced Waterproofing Adhesive. Excellent on Metal Seams.
EXCLUSIVITY: Some Nationwide Products are sold Exclusively by Dealers and/or Distributors in Select Areas and Regions.
LEAKS: Leaks resulting from acts of providence, owner or their agents, are not the responsibility of NPCMI and under no circumstances shall NPCMI be liable in any respects to the building, it’s occupants, it’s contents or for any consequential or incidental damages. Leaks are required to be repaired prior to the application of any coating and therefore are not covered under any warranty. NPCMI does not warranty or guarantee for any Past, Present or Future Leaks. Leaks must be fixed and/or repaired prior to the application of any paint, coating or other product purchased from NPCMI.
LABOR: Products Warranties are Limited to Material Only (see Limitations below), Labor is not included. Nationwide does not Warranty for Labor of any Kind.
LIMITATIONS: No express or implied warranty is made for any product for its merchantability, suitability, or fitness for a particular use or purpose, and any warranty provided is limited in scope and duration to the express warranty provided by each individual product’s Warranty. If no duration of time for a Warranty is stated for a specific product then the maximum warranty shall be the lesser of (i) one year from date of purchase and (ii) the shortest period required by applicable law. If a product has an express Warranty and such Warranty was not registered with NPCMI by using a Warranty Registration Certificate, the maximum warranty duration will be one year from date of purchase. NPCMI shall not be liable for incidental or consequential damages, including, but not limited to, lost profits or earnings, or for damage to any building on which NPCMI product is applied, such building’s contents, or such building’s occupants. NPCMI's liability is limited to the reasonable replacement cost of product that has been fully paid for and shall be limited to defective product in the affected area only, whether any claim against it is based upon strict liability, negligence, breach of warranty, or any other theory or cause of action. Exclusive venue and jurisdiction for any claim with regards to any product of NPCMI or its related Warranty shall be in the State of Florida Court sitting in Manatee County, Florida, U.S.A.
The use of any products not purchased from Nationwide Protective Coating Manufacturers, Inc. used in association with NPCMI products will void any warranties by NPCMI, unless agreed to in writing by NPCMI prior to application of NPCMI products.
DISCLAIMER: Information presented on this Web Page or any other Web Page on Nationwide Protective Coating Mfrs., Inc. Web Site has been compiled by sources to be reliable, and is accurate and reliable to the best of our knowledge and belief, but is not guaranteed to be so.
DISCLAIMER VOCs: Any mention of the terms “ZERO V.O.C.” “V.O.C. FREE” or “NO V.O.C.” means that analytical results of testing on representative products show VOC levels measured at less than 5 grams per liter +/- 5%. Any mention of the term “LOW V.O.C.” means that analytical results of testing on representative products show VOC levels measured at less than 50 grams per liter +/- 5%.
Website Privacy Policy
US Owned and Operated WEB SITE OWNER: NATIONWIDE PROTECTIVE COATING MANUFACTURERS, INC.® 2023 - All Copyrightable Rights Reserved - Website Version L7-1.0
LEAKS: Leaks resulting from acts of providence, owner or their agents, are not the responsibility of NPCMI and under no circumstances shall NPCMI be liable in any respects to the building, it’s occupants, it’s contents or for any consequential or incidental damages. Leaks are required to be repaired prior to the application of any coating and therefore are not covered under any warranty. NPCMI does not warranty or guarantee for any Past, Present or Future Leaks. Leaks must be fixed and/or repaired prior to the application of any paint, coating or other product purchased from NPCMI.
LABOR: Products Warranties are Limited to Material Only (see Limitations below), Labor is not included. Nationwide does not Warranty for Labor of any Kind.
LIMITATIONS: No express or implied warranty is made for any product for its merchantability, suitability, or fitness for a particular use or purpose, and any warranty provided is limited in scope and duration to the express warranty provided by each individual product’s Warranty. If no duration of time for a Warranty is stated for a specific product then the maximum warranty shall be the lesser of (i) one year from date of purchase and (ii) the shortest period required by applicable law. If a product has an express Warranty and such Warranty was not registered with NPCMI by using a Warranty Registration Certificate, the maximum warranty duration will be one year from date of purchase. NPCMI shall not be liable for incidental or consequential damages, including, but not limited to, lost profits or earnings, or for damage to any building on which NPCMI product is applied, such building’s contents, or such building’s occupants. NPCMI's liability is limited to the reasonable replacement cost of product that has been fully paid for and shall be limited to defective product in the affected area only, whether any claim against it is based upon strict liability, negligence, breach of warranty, or any other theory or cause of action. Exclusive venue and jurisdiction for any claim with regards to any product of NPCMI or its related Warranty shall be in the State of Florida Court sitting in Manatee County, Florida, U.S.A.
The use of any products not purchased from Nationwide Protective Coating Manufacturers, Inc. used in association with NPCMI products will void any warranties by NPCMI, unless agreed to in writing by NPCMI prior to application of NPCMI products.
DISCLAIMER: Information presented on this Web Page or any other Web Page on Nationwide Protective Coating Mfrs., Inc. Web Site has been compiled by sources to be reliable, and is accurate and reliable to the best of our knowledge and belief, but is not guaranteed to be so.
DISCLAIMER VOCs: Any mention of the terms “ZERO V.O.C.” “V.O.C. FREE” or “NO V.O.C.” means that analytical results of testing on representative products show VOC levels measured at less than 5 grams per liter +/- 5%. Any mention of the term “LOW V.O.C.” means that analytical results of testing on representative products show VOC levels measured at less than 50 grams per liter +/- 5%.
Website Privacy Policy
US Owned and Operated WEB SITE OWNER: NATIONWIDE PROTECTIVE COATING MANUFACTURERS, INC.® 2023 - All Copyrightable Rights Reserved - Website Version L7-1.0