ACRYLOCOAT™ brand ACRYLOSTUK™ is One Part of the Multi-Stage ACRYLOCOAT™ Decorative Finish Protective Coating System. ACRYLOSTUK™ is a Waterproofing Acrylic Spray or Roll Applied Decorative Coarse Finish Texture Coating. It is a Revolutionary Elastomeric Acrylic Formulation with a Trade Secret mixture of Aggregates to create a Spray Applied (using proper spray equipment) or Roll Applied Worm Pattern, Cement Like and Stucco Like Finish as an Exterior Decorative Finish System. When applied in conjunction with ACRYLOCOAT™ brand ACRYLOPRIME™, it seals and forms a waterproofing, flexible, breathable finish that has outstanding durability. It has been designed to replace cementitious finishes and combat the destructive environmental forces of nature. The ACRYLOCOAT™ brand Product Line is generally an Exterior Decorative Coating System, but can be used on Interior Surfaces as well. Excellent for use as an Interior Basement Finish on most types of Masonry Walls. A FIFTEEN YEAR LIMITED MATERIAL WARRANTY against chipping, cracking and peeling is available only when applied as part of the ACRYLOCOAT™ Decorative Finish Protective Coating System. Inquire about the Detailed Application Procedure.
1 Gallon
#70071-1
5 Gallon
#70071-5
55 Gallon
#70071-55
Pallet
#70071-36/5
Tote
#70071-250
ACRYLOSTUK™ can be used on most any Interior or Exterior Substrate including: wood, primed metal, galvanized, primed synthetic or aluminum siding, tin, copper, asbestos, asphalt, urethane, polyester, styrofoam, foam, fiberglass, clay, adobe, brick, stucco, slate, cement block, poured concrete, slab and various other substrates. The ACRYLOCOAT™ brand Product Line is excellent to decorate and enhance the exterior walls and facades of buildings, homes and facilities including: residential, commercial and industrial applications.
If ACRYLOSTUK™ is used in the 15 Year Warranted ACRYLOCOAT™ Decorative Finish Protective Coating System, please inquire for a detailed application procedure sheet and strictly follow the application method. If Applicable, trenching is necessary to form a complete seal; trench 4 to 6 inches around the perimeter of the structure. For proper adhesion to an existing substrate, it is essential that the surface be pressure washed at a minimum of 1500 P.S.I., using a water and chlorine solution, removing any loose, flaking or peeling paint along with any dirt, oil, grease, residues and especially mold, mildew and algae. Wire brush if necessary. Apply only to a sound, well prepared wall surface. Rusted metal must be primed. Inquire about METAL-PRIME RED-OX™ Rust Treatment Process. Patch any holes, cracks, seams, imperfections, etc., with ACRYLOPATCH™ Waterproofing Caulk & Sealant. It is recommended to use ACRYLOPRIME™ before application of ACRYLOSTUK™, and a coat of ACRYLOSEAL™ or ACRYLOSATIN™ Finish Coat over the coat of ACRYLOSTUK™. Wait 12 hours between coats of any of the ACRYLOCOAT™ Product Line.
ACRYLOSTUK™ APPLICATION PROCEDURE:
No thinning is required, use product as is from the container. Hand stir or use a heavy duty drill motor with a paddle type blade to mix if necessary. Do not apply when temperatures are below 45 degrees Fahrenheit or when humidity is very high. ACRYLOSTUK™ can be sprayed with equipment as basic as a hopper gun and can produce unlimited textures simply adjusting the air pressure and/or the size of the spray tip. This method also helps provide different knock down finishes. ACRYLOSTUK™ can be applied using a heavy nap roller to produce a coarse finish as well as many other aesthetic finishes. Other finishes can also be formed by using a metal or plastic trowel, placed flat and directly onto the freshly applied ACRYLOSTUK™ and moving it over the surface in a circular or “figure eight” motion, the swirl or worm pattern desired. Clean all tools and equipment immediately after use with warm soapy water.
Data Sheet - ACRYLOSTUK™ Coarse Textured Decorative Coat Datasheet