ACRYLOPRIME™

ACRYLOCOAT™ brand ACRYLOPRIME™ is One Part of the Multi-Stage ACRYLOCOAT™ Decorative Finish Protective Coating System. ACRYLOPRIME™ is a High Solids Acrylic Waterproofing Adhesive Resin Mixture, Elastomeric Bonding Primer. It is a Brush, Roller or Spray applied Prime Coat that prepares the surface for one of the ACRYLOCOAT™ Exterior Decorative Finish Systems. When applied in conjunction with ACRYLOSAND™ or ACRYLOSTUK™, it seals and forms a waterproofing, flexible, breathable finish that has outstanding durability. ACRYLOPRIME™ revitalizes and strengthens the substrate to which it is applied, preventing cracking, efflorescense, spalling and segregation.
An extremely high resin content provides for excellent adhesion to most any substrate creating a tight, permanent bond to the coating that it is applied over. This eliminates the possibility of moisture under the coating system that will extend the life of the ACRYLOCOAT™ System considerably.
ACRYLOPRIME™ gives extra strength to the High Solids ACRYLOCOAT™ Textures and its Elastomeric qualities greatly reduce the possibility of cracking in the finished system. The ACRYLOCOAT™ brand Product Line is generally an Exterior Decorative Coating System, but can be used on Interior Surfaces as well.

ACRYLOPRIME™ can be used on most any Interior or Exterior Substrate including: wood, primed metal, galvanized, primed synthetic or aluminum siding, tin, copper, asbestos, asphalt, urethane, polyester, styrofoam, foam, fiberglass, clay, adobe, brick, stucco, slate, cement block, poured concrete, slab and various other substrates.
The ACRYLOCOAT™ brand Product Line is excellent to decorate and enhance the exterior walls and facades of buildings, homes and facilities including: residential, commercial and industrial applications.

ACRYLOPRIME™ SURFACE PREPARATION:
If ACRYLOPRIME™ is used in the 15 Year Warranted ACRYLOCOAT™ Decorative Finish Protective Coating System, please inquire for a detailed application procedure sheet and strictly follow the application method.

If Applicable, trenching is necessary to form a complete seal; trench 4 to 6 inches around the perimeter of the structure. For proper adhesion to an existing substrate, it is essential that the surface be pressure washed at a minimum of 1500 P.S.I., using a water and chlorine solution, removing any loose, flaking or peeling paint along with any dirt, oil, grease, residues and especially mold, mildew and algae. Wire brush if necessary.
Apply only to a sound, well prepared wall surface. Rusted metal must be primed. Inquire about METAL-PRIME RED-OX™ Rust Treatment Process. Patch any holes, cracks, seams, imperfections, etc., with ACRYLOPATCH™ Waterproofing Caulk & Sealant prior to applying ACRYLOPRIME™. Wait 12 hours between coats of any of the ACRYLOCOAT™ Product Line.

ACRYLOPRIME™ APPLICATION PROCEDURE:
Do not thin, use product as is from the container. Do not apply when temperatures are below 45 degrees Fahrenheit or when humidity is very high. Apply ACRYLOPRIME™ with a Brush, Roller or Sprayer to the prepared surface. Clean all tools and equipment immediately after use with warm soapy water.