Call Now
1.800.423.7264
Call Us Today!
1.800.423.7264

Nationwide Coatings®

The

PERM

anent Coating Solution™

Paint Made In The USA
Energy Star Partner Logo

Phone: 941.753.7500

U.S.: 1.800.423.7264

The Industry Leader in ELASTOMERIC Waterproofing Insulating Ceramic Paints and Coatings

Request Info Now
For a Clear Rejuvenating Sealer for Shingle Roofs Click Here for SHINGLE SEALER™

15-Year System - Built to Outlast Ordinary Roof Coatings

PERMAKOTE® Shingle Roof Coating elastomeric ceramic membrane flexes through heat, cold, and rain without cracking. Ceramic microspheres (60,000 psi crush strength) reinforce the dried film for additional impact, salt spray, wind lift and wind driven rain resistance.

USA Manufactured Since 1964 | Ships Worldwide

PERMAKOTE® Shingle Roof Coating is Formulated for Shingle Roofs. Elastomeric Ceramic Roof Coating. Any Color Available.

Nationwide Coatings Permakote Shingle Sealer Being applied
Nationwide Coatings Permakote Shingle Sealer Being applied to shingles
Nationwide Coatings Permakote Shingle Sealer roof prep

Seamless Waterproofing Membrane - Breathable Protection for Shingle Roofs

PERMAKOTE® Shingle forms a 100% elastomeric acrylic waterproofing membrane that blocks liquid water while letting vapor escape. No trapped moisture, no peeling. The seamless 16 MILS film exceeds Federal Specification TTC-555-B for elastomeric roof coatings. PERMAKOTE® delivers for your shingle roof restoration!

permakote shingle application halfway

Ceramic Heat Dissipating Technology- Helps Reduce Energy Costs

Ceramic microspheres in PERMAKOTE® Shingle dissipate heat at the roof surface before it transfers into your home. Backed by ENERGY STAR partnership, this heat reflective roof paint is designed to help reduce cooling costs through peak summer months as well as insulative properties in the winter. Ceramics also help with sound dampening. Extend the life of your shingle roof, Restore Don’t Replace!

Re-Roofing Alternative - Extend Your Shingle Roof Life

Skip the tear off. PERMAKOTE® Shingle transforms a structurally sound but aging shingle roof into a waterproofing, protected surface for years to come. Two-coat application at 100 sq ft per gallon by brush, roller, or industrial sprayer. Water cleanup with soap and water. By choosing PERMAKOTE®, you are investing in a product that delivers both practical benefits and aesthetic improvements, ensuring your home remains comfortable, protected, and energy-efficient for years to come.

Permakote Shingle Roof Paint and Roof Coating
Permakote Shingle Roof Coating
Permakote Shingle Roof Paint

Easy Application for Homeowners and Pros - Made in the USA Since 1964 - Eco-Friendly Formula

Apply PERMAKOTE® Shingle with a standard roller, brush, or airless sprayer. Water-based formula cleans up with soap and water. Apply above 45 degrees F on a clean, dry shingle surface. If you think replacement is the only option, we have something to consider.

Need help? Call 1-800-423-7264 Speak with a Shingle Roof Coating Expert.

Superior Mold, Mildew and Fungi Resistance

When it comes to safeguarding your shingle roof from the relentless effects of nature, PERMAKOTE® Shingle Roof Coating stands out. One of its most impressive features is its superior resistance to mold, mildew, and fungi—common culprits that can severely compromise the longevity and integrity of your shingle roof.

Permakote Shingle before after

Certified Performance - Class A Fire Rating and Energy Star

PERMAKOTE® Shingle carries a Class A Fire Rating per NFPA 101 (ASTM E84-01), meets or exceeds ENERGY STAR Energy Efficiency guidelines since 1999, exceeds Federal Specification TTC-555-B, and carries a Green Safe seal. VOC under 50 gr/ltr.

Eco-Friendly, Easy Application and Water Clean Up

PERMAKOTE® Shingle Roof Coating offers a trifecta of benefits: it’s eco-friendly, easy to apply, and even easier to clean up with soap and water at the end of the job!

online color choices roof coatings
breathable roof coating
Buy Now
Request Info Now
  • Technical Data:
  • Solids by Weight: 65% +/- 2%
  • Weight per Gallon: 11.9 lbs. +/- .3 lbs.
  • V.O.C.: 46 g/l
Web Links
Blog: The Best Roof Coating for Shingle Roofs
Blog: PERMAKOTE® Shingle Roof Coating: The Ultimate Shield for Your Shingle Roof
Blog: Roof Coating Versus Roof Replacement: Which Option Makes the Most Sense?
Blog: What Coating Makes Shingles Last Longer? Discover the Power of PERMAKOTE® and SHINGLE SEALER™
Photos
Permakote shingle roof coating brochure image
PRODUCT DESCRIPTION:
PERMAKOTE Shingle is a waterproofing ceramic roof coating for homeowners and commercial property owners who want to protect an aging asphalt shingle roof without replacing it. One product addresses three priorities: sealing the roof surface against rain and moisture intrusion, reducing heat transfer through insulating ceramic microspheres, and refreshing the roof's appearance in one of nine available colors.

The technology behind PERMAKOTE Shingle is an elastomeric acrylic binder reinforced throughout with ceramic microspheres rated at 60,000 psi crush strength. Once dried, the membrane is flexible and rubberlike, stretching with roof movement through freeze-thaw cycles and summer heat expansion without cracking or peeling. The breathable film allows water vapor to escape so moisture does not become trapped beneath the coating layer.

PERMAKOTE Shingle is a practical roof repair sealant and re-roofing alternative for structurally sound shingles. A professional tear-off and replacement project runs into the tens of thousands of dollars; PERMAKOTE Shingle extends the same roof's service life at a fraction of that cost. One of the longest lifespans available for a shingle roof coating paint product.

Apply to a clean, dry shingle surface when ambient and surface temperatures are above 45 degrees F. Two coats at 100 sq ft per gallon per coat, applied by brush, long-handled roller, or industrial airless sprayer. Cleans up while wet with soap and water. Do not apply to structurally unsound roofs.

Nationwide Protective Coating Mfrs., Inc. has produced water-based elastomeric ceramic coatings from Sarasota, Florida since 1964. PERMAKOTE is manufactured in the USA, carries a VOC level under 50 gr/ltr, and ships in nine standard colors including Midnight Black, Battleship Gray, Hunter Green, Cocoa Brown, Red Earth, and Dove Gray. Custom fan deck colors are available on request.

PERMAKOTE® SHINGLE is an ENERGY STAR® Roof Coating for shingle roofs. It passed the CLASS A Fire Rating Test as per ASTM E84-01, NFPA 101 Life Safety Code. PERMAKOTE® SHINGLE elastomeric roof paint is an inexpensive alternative solution to roofing and re-roofing. PERMAKOTE® SHINGLE offers a 15 YEAR LIMITED MATERIAL WARRANTY (see Warranty Compliance Information Section Below).

PERMAKOTE® SHINGLE USES: Recommended for well-draining, SLOPED roofing surfaces only (see Warranty Compliance Below). Excellent adhesion on weathered wood, shakes, plywood, clapboard, primed metal, galvanized, aluminum, tin, copper, asbestos, asphalt, urethane, polyester, primed styrofoam, fiberglass, built-up-roofs, bonded roof gravel, rolled roofing, modified bitumen membranes, mineral surfaced roofing, concrete tiles, clay tiles, masonry tiles (flat or barrel), primed synthetic or aluminum, adobe, slate, slab, properly prepared EPDM, and various other substrates. PERMAKOTE® SHINGLE is the best rubber roof coating and ideal for residential, commercial and industrial applications as a roof paint sealant. For flat roofs or limited ponding water situations inquire about PERMAKOTE PLUS®, Limited Ponding Water Roof Coating.

SURFACE PREPARATION: Apply only to a sound, completely dry, well prepared shingle roof surface. Leaks must be repaired before any coating is applied. If primer was applied, it is essential that the primer surface is clean and dry and free of all moisture. If no primer was applied, prepare surface by thoroughly pressure washing with a water and chlorine mixture using at least 1500 P.S.I. to remove any previous coatings, dirt, grease, and other foreign materials, especially mold, mildew and algae. PERMAKOTE® SHINGLE will resist mildew growth, but will not kill mildew already on the surface. Patch any holes, cracks, flashings, valleys, vents, etc., with PERMAPATCH™, a Waterproof Caulk and Sealant. Tape & seal all seams with PERMATAPE™, a Polyester Fabric Tape.

APPLICATION PROCEDURE: Stir well before using. Do not thin, use product as is. Mix multiple containers of color together for greater color consistency. Do not apply when temperatures are below 45 degrees Fahrenheit or when humidity is very high. Do not apply when coating will be subjected to rain or heavy dew before it has had enough time to dry (approx. 2 to 4 hours). Drying time will vary depending on temperature, humidity and location. Apply using brush, roller or spray. Spread coating uniformly. Spread Rate will vary depending on surface. Apply each coat between 12 to 16 mils wet film thickness. Wait at least 12 hours before applying a second coat. Two coats resulting in a minimum 16 mil total dry film thickness is required Airless Sprayers: Use at least a 1 gallon per minute piston type airless sprayer with a recommended tip size of .025. Remove all line filters and gun filters before spraying. Clean Up: Clean up all spills, tools and overspray immediately while the coating is still wet with warm soapy water.
Data Sheet - PERMAKOTE® SHINGLE Roof Coating Datasheet

People Also Ask

Yes—provided the product is specifically engineered for asphalt shingle roofs. PERMAKOTE® Shingle is formulated to create a seamless membrane while remaining highly breathable. Unlike ordinary exterior paint, it is designed specifically for restoring and protecting aging asphalt shingle roofs.

PERMAKOTE® Shingle is backed by a 15-Year Written Warranty when applied according to Nationwide Coatings' application specifications. The elastomeric membrane is designed to withstand UV exposure, rain, wind, and normal thermal expansion and contraction while extending the service life of eligible shingle roofs.

PERMAKOTE® Shingle forms a seamless waterproofing membrane that helps prevent water intrusion across the roof surface. However, active leaks caused by damaged flashing, structural issues, deteriorated decking, or major roof damage should be properly repaired before applying the roof coating. Once the roof has been prepared correctly, finishing with the roof coating provides long-term weather protection over the restored surface.

Yes. PERMAKOTE® Shingle is available in virtually any color, allowing homeowners and contractors to refresh the appearance of an aging roof while adding long-lasting protection. Changing the roof color can dramatically improve curb appeal without the cost of a complete roof replacement.

For roofs that are still structurally sound, an elastomeric shingle roof coating can be a cost-effective restoration option. PERMAKOTE® Shingle creates a fully adhered seamless membrane that protects against UV degradation, weathering, and moisture while helping extend the life of the existing roof. In many cases, restoring a roof with a premium roof coating can delay the expense and disruption of a complete roof replacement.

Yes. One of PERMAKOTE® Shingle's biggest advantages is that it is highly breathable. The coating helps prevent liquid water from penetrating the roof while allowing moisture vapor to escape. This helps reduce the possibility of moisture becoming trapped beneath the coating and contributes to long-term coating performance.

Frequently Bought Together

PERMAPATCH™

7540

Acrylic Elastomeric Waterproofing High Solids Trowel or Brush Grade Roof, Wall & Floor White Caulk & Sealant. Minimal Shrinkage.

elastomeric patching compound

MULCH GLUE™

5401

Locks Down Mulch, Pebbles, Sand & More for Weather and Water Resistance. Formulated for All Mulch & Yard Types.

Mulch Glue

PERMAKOTE PLUS®

7530

Designed for Flat or Pitched Roofs. Elastomeric Waterproofing Insulating Ceramic Roof Coating. 7-15 Year Written Warranty*.

flat roof coating

PERMAGLUE™

7599

Regranulation Adhesive Sealer Clear Gloss Waterproofing for Replacing Shingle Roof Granules on Shingles.

roof granule adhesive

Top Rated Products

PERMAKOTE®

7525

Our Most Popular Elastomeric Roof Coating for Pitched Roofs. Metal, Tile & Other Surfaces. Any Color Available. 15 Year Written Warranty.

elastomeric roof coating

PERMAGARD®

7522

Our Best Roof Coating for Pitched Roofs. Metal, Tile & Other Surfaces. Any Color Available. 20 Year Written Warranty.

best roof coating

SHINGLE SEALER™

7501

Acrylic Sealer for Protecting, Rejuvenating & Waterproofing Shingle & Granulated Roof Surfaces. 7 Year Written Warranty.

shingle sealer

PERMASIL™ SILICONE

7600

100% Pure Silicone Elastomeric Roof Coating for Flat Roofs. High Solids Silicone. Some Colors Available. 12 Year Written Warranty.

silicone roof coating
USA Manufactured Since 1964

Over 60 years of quality and innovation

PROUDLY MADE IN THE USA

Manufactured with premium raw materials

RESIDENTIAL COMMERCIAL INDUSTRIAL

Solutions for every type of building

TRUSTED BY CUSTOMERS WORLDWIDE

Proven performance in all climates

EXPERT SUPPORT BEFORE & AFTER SALE

We answer the phone

1.800.423.7264
941.753.7500
info@nationwidecoatings.com
EXCLUSIVITY: Some Nationwide Products are sold Exclusively by Dealers and/or Distributors in Select Areas and Regions.
LEAKS: Leaks resulting from acts of providence, owner or their agents, are not the responsibility of NPCMI and under no circumstances shall NPCMI be liable in any respects to the building, it’s occupants, it’s contents or for any consequential or incidental damages. Leaks are required to be repaired prior to the application of any coating and therefore are not covered under any warranty. NPCMI does not warranty or guarantee for any Past, Present or Future Leaks. Leaks must be fixed and/or repaired prior to the application of any paint, coating or other product purchased from NPCMI.
LABOR: Products Warranties are Limited to Material Only (see Limitations below), Labor is not included. Nationwide does not Warranty for Labor of any Kind.
LIMITATIONS: No express or implied warranty is made for any product for its merchantability, suitability, or fitness for a particular use or purpose, and any warranty provided is limited in scope and duration to the express warranty provided by each individual product’s Warranty. If no duration of time for a Warranty is stated for a specific product then the maximum warranty shall be the lesser of (i) one year from date of purchase and (ii) the shortest period required by applicable law. If a product has an express Warranty and such Warranty was not registered with NPCMI by using a Warranty Registration Certificate, the maximum warranty duration will be one year from date of purchase. NPCMI shall not be liable for incidental or consequential damages, including, but not limited to, lost profits or earnings, or for damage to any building on which NPCMI product is applied, such building’s contents, or such building’s occupants. NPCMI's liability is limited to the reasonable replacement cost of product that has been fully paid for and shall be limited to defective product in the affected area only, whether any claim against it is based upon strict liability, negligence, breach of warranty, or any other theory or cause of action. Exclusive venue and jurisdiction for any claim with regards to any product of NPCMI or its related Warranty shall be in the State of Florida Court sitting in Manatee County, Florida, U.S.A.
The use of any products not purchased from Nationwide Protective Coating Manufacturers, Inc. used in association with NPCMI products will void any warranties by NPCMI, unless agreed to in writing by NPCMI prior to application of NPCMI products.
DISCLAIMER: Information presented on this Web Page or any other Web Page on Nationwide Protective Coating Mfrs., Inc. Web Site has been compiled by sources to be reliable, and is accurate and reliable to the best of our knowledge and belief, but is not guaranteed to be so.
DISCLAIMER VOCs: Any mention of the terms “ZERO V.O.C.” “V.O.C. FREE” or “NO V.O.C.” means that analytical results of testing on representative products show VOC levels measured at less than 5 grams per liter +/- 5%. Any mention of the term “LOW V.O.C.” means that analytical results of testing on representative products show VOC levels measured at less than 50 grams per liter +/- 5%.
Website Privacy Policy
US Owned and Operated WEB SITE OWNER: NATIONWIDE PROTECTIVE COATING MANUFACTURERS, INC.® 2026 - All Copyrightable Rights Reserved - Website Version L7-1.0