Crete-Grip Bucket - Nationwide Protective Coatings

CRETE-GRIP™ ADHESIVE PRIMER & TROUBLESHOOTING DECK BONDER

CRETE-GRIP™ is a clear, non-pigmented, acrylic epoxy ester, penetrating primer for use over uncoated concrete surfaces. CRETE-GRIP™ is a Low V.O.C. waterborne coating which will produce exceptional adhesion, penetration and bonding properties to porous concrete surfaces and superior adhesion and penetration to smooth troweled concrete. CRETE-GRIP™ will reduce most problems associated with concrete stains and paints when used as a primer coat. It is excellent for use as a bonding adhesive coat to remedy most defective areas when failure is down to bare concrete.

Spread Rate: 200-300 Square Feet Per Gallon

  • Additional Tech Data:

  • Solids by Weight: 20%
  • Weight per Gallon: 8.4 lbs.
  • Product Numbers and Information

  • #7475-1 (1 Gallon)
  • #7475-5 (5 Gallon)
  • #7475-55 (55 Gallon)

Recommended Products

AQUACLEAR™
4795

Clear Acrylic Industrial Grade Penetrating Concrete Sealer, Preservative & Protective Finish. Excellent Abrasion, Chemical & Hot Tire Resistance. For Coated/Uncoated Concrete Surfaces.

Aquaclear Bucket - Nationwide Protective Coatings
Learn More

ULTRATHANE™
5840

Clear Gloss 100% Urethane with 40% Active Solids Protective Urethane Coating & Sealer. Excellent Abrasion & Chemical Resistance. For Most Coated Surfaces.

Ultrathane Bucket - Nationwide Protective Coatings
Learn More

WATERSEAL™
5500

Clear Acrylic Economy Grade Waterproofing & Penetrating Concrete Sealer. For Coated/Uncoated Concrete Surfaces.

Waterseal Bucket - Nationwide Protective Coatings
Learn More

ENVIROPOXY™
5900

Waterborne Two Component Heavy Duty Industrial High Gloss Epoxy Coating and Floor System. Clear or Colors. For Most Coated/Uncoated Interior Surfaces.

Enviropoxy Bucket - Nationwide Protective Coatings
Learn More