How Does SHINGLE SEALER™ Perform? Testing Proves Superior Granule Retention, Breathability & Weather Resistance
Asphalt shingle roofs are constantly exposed to harsh environmental conditions, including intense sunlight, rain, wind, humidity, and temperature fluctuations. Over time, these conditions can contribute to the deterioration of asphalt shingles, causing protective granules to loosen, surfaces to become weathered, and roofing materials to lose their ability to protect the structure beneath them. One of the most important factors in maintaining an asphalt shingle roof is preserving the protective granules embedded in the shingle surface. These granules help shield the underlying asphalt from damaging ultraviolet radiation and environmental exposure. Nationwide Coatings developed SHINGLE SEALER™ as a clear, penetrating acrylic roof sealer specifically formulated to rejuvenate, provides waterproofing, and help preserve asphalt and fiberglass shingle roofs. But how well does it perform? Nationwide Coatings conducted technical testing to evaluate SHINGLE SEALER™ for granule adhesion, moisture vapor permeability, salt spray resistance, and accelerated weathering. The results demonstrate the importance of using a roof sealer designed specifically for asphalt shingles.
Granule Adhesion Testing: 96% Improvement in Granule Retention
One of the most significant challenges facing aging asphalt shingle roofs is the gradual loss of protective mineral granules. As granules loosen and detach, the underlying asphalt becomes increasingly exposed to sunlight and weathering, potentially accelerating the deterioration of the shingles. To evaluate the ability of SHINGLE SEALER™ to secure these granules, Nationwide Coatings performed a controlled granule adhesion scrub test comparing untreated asphalt shingles against shingles treated with SHINGLE SEALER™. Both samples were subjected to 1,000 scrub cycles using a standardized test path across the shingle surface. The results showed a substantial difference between the treated and untreated samples. The uncoated shingle experienced a granule loss of 5.3%, while the shingle treated with SHINGLE SEALER™ experienced only 0.2% granule loss. This represents approximately a 96% reduction in granule loss compared with the untreated sample under the same test conditions. The sealed shingle retained virtually all of its measured granules throughout the 1,000 scrub cycles, demonstrating the product's ability to help bind and secure loose mineral granules to the shingle surface. This is especially important for homeowners with aging but structurally sound asphalt shingle roofs, where preserving the existing granule layer can help protect the roofing material and support a longer service life.
Permeability Testing: Waterproofing Protection Without Trapping Moisture Vapor
A roof sealer should do more than resist water penetration. It should also allow moisture vapor to escape through the roofing assembly. Trapping moisture beneath a coating can create additional problems, making breathability an important consideration when selecting an asphalt shingle sealer. Nationwide Coatings tested SHINGLE SEALER™ for moisture vapor permeability and recorded a result of 24 U.S. perms at a dry film thickness of 1.5 mils. This permeability rating demonstrates that the applied sealer film allows moisture vapor to pass through rather than creating a completely impermeable barrier. SHINGLE SEALER™ is formulated to provide a protective, water-resistant surface while maintaining vapor permeability. This combination of waterproofing and breathability is an important characteristic for a clear roof sealer intended specifically for asphalt and fiberglass shingles. By helping reduce water intrusion while allowing moisture vapor to escape, SHINGLE SEALER™ provides a balanced approach to protecting and preserving shingle roofing materials.
Salt Spray Testing: Evaluating Resistance to Harsh Environmental Exposure
Roofing materials are exposed to a variety of environmental conditions throughout their service life. Coastal properties and buildings in humid regions can experience additional exposure to salt-laden air, making environmental resistance an important consideration when evaluating roof protection products. Nationwide Coatings included salt spray testing in its SHINGLE SEALER™ technical evaluation to examine the appearance and gloss characteristics of coated and uncoated test samples following exposure. The report recorded gloss measurements before exposure, after 168 hours of salt spray exposure without rinsing, and after 169 hours with rinsing. The coated 3-inch by 6-inch test panel maintained a gloss reading of 95.9 after 168 hours of unrinsed exposure, compared with an initial reading of 101. Following rinsing, the coated panel recorded a gloss reading of 103. The uncoated comparison panel, by contrast, experienced a substantial gloss reduction from an initial reading of 165 to 15 after 168 hours of unrinsed exposure, recovering to 71.4 following rinsing. The report also evaluated actual shingle samples. Because asphalt shingles have a naturally rough surface and very low initial gloss, their readings were much lower than those of the smooth test panels. The uncoated shingle maintained a gloss reading of 0.2, while the sealed shingle recorded 0.5 initially, 0.5 after unrinsed exposure, and 0.4 after rinsing. These results provide additional insight into the appearance characteristics of sealed and unsealed samples following salt spray exposure. While gloss measurements are not a direct measurement of corrosion protection or long-term roof life, they help document how the test surfaces responded to the specified environmental exposure.
Accelerated Weathering Testing: Evaluating Appearance and Gloss Retention
In addition to granule adhesion, permeability, and salt spray testing, Nationwide Coatings evaluated SHINGLE SEALER™ under accelerated ultraviolet weathering conditions. The QUV testing portion of the technical report examined the appearance and color changes of sealed and uncoated shingle samples following 500 hours of exposure. The results showed that the sealed shingles experienced less measured appearance change than the uncoated shingle. The two sealed shingle samples recorded 500-hour Delta E values of 3.26 and 2.14, while the uncoated shingle recorded a value of 7.59. A lower Delta E value indicates less measured color difference between the initial and final readings. This testing provides additional evidence of the ability of SHINGLE SEALER™ to help maintain the appearance of treated shingles during accelerated weathering exposure. The report also noted that the initial gloss readings of the shingles were very low because of their naturally rough surface.
Why These Test Results Matter for Asphalt Shingle Roof Restoration
The performance of an asphalt shingle roof depends on maintaining the integrity of its protective surface. When granules begin to loosen, water exposure and ultraviolet radiation can contribute to the deterioration of the underlying roofing material. Applying a product specifically formulated to penetrate and rejuvenate asphalt shingles can help address one of the common problems associated with aging roofs: progressive granule loss. SHINGLE SEALER™ combines a high-solids, water-based acrylic formulation with penetrating properties designed to help re-bond loose granules while leaving behind a clear, breathable protective film. Its documented 96% improvement in granule retention during scrub testing, 24-perm moisture vapor permeability rating, and additional salt spray and accelerated weathering results demonstrate several important performance characteristics. For homeowners, roofing contractors, and property owners looking to preserve an existing asphalt or fiberglass shingle roof, these test results provide measurable information when evaluating roof restoration options.
Extend the Life of Your Shingle Roof with SHINGLE SEALER™
Replacing an asphalt shingle roof can be a major expense, and not every aging roof requires immediate replacement. When shingles remain structurally sound but are beginning to show signs of weathering, fading, or granule loss, a properly selected roof rejuvenation treatment may help preserve the existing roofing system. SHINGLE SEALER™ from Nationwide Coatings is specifically formulated to penetrate, rejuvenate, helps provide waterproofing, and help secure loose granules on asphalt and fiberglass shingle roofs. It’s clear finish preserves the natural appearance of the shingles while providing a breathable protective film. With more than 60 years of manufacturing experience, Nationwide Coatings continues to develop specialized coatings and restoration products designed to protect roofing materials and extend their useful service life. Rather than relying solely on marketing claims, the SHINGLE SEALER™ technical service report provides measurable test results that demonstrate the product's granule retention, permeability, and performance under specified environmental testing conditions.
If you are looking for a clear asphalt shingle roof sealer that helps preserve granules, maintain breathability, and protect against the elements, explore SHINGLE SEALER™ from Nationwide Coatings.
Learn More: https://www.nationwidecoatings.com/pl/shingle-sealer
Manufactured in the USA by Nationwide Coatings.