ULTRA TEX™ is a bright white, flat finish, acrylic elastomeric, insulating ceramic, waterproofing Textured Wall Coating. It is a latex based, high build formula that provides waterproofing and soundproofing, and also insulates, beautifies and protects. It is a self-priming coating that forms a thick rubber-like ceramic shield of protection that actually becomes part of the wall due to excellent adhesion and bonding. It will expand and contract with varying hot and cold temperatures, and resists thermal shock. Unsurpassed in technology, ULTRA TEX™ offers superior mildew resistance, ceramic insulation & soundproofing, ultraviolet ray reflectivity and a beautiful finish. We can match competitors colors or custom colors. It qualifies for a CLASS A Fire Rating. Designed as an insulating, energy saving textured wall coating that stabilizes and strengthens walls while combating the destructive environmental forces of nature. ULTRA TEX™ offers a 25 YEAR LIMITED WARRANTY when applied to manufacturer’s specifications (Application Procedure manuals available upon request). ULTRA TEX™ will eliminate costly maintenance, repairs and frequent repainting. This easy to apply, maintenance free textured wall coating system will provide years and years of durable protection and outstanding beauty.
1 Gallon
#2825-1
5 Gallon
#2825-5
55 Gallon
#2825-55
Pallet
#2825-36/5
Tote
#2825-250
ULTRA TEX™ possesses excellent adhesion on weathered wood, shakes, plywood, clapboard, primed metal, galvanized, primed synthetic or aluminum siding, tin, copper, asbestos, asphalt, urethane, polyester, Styrofoam, polystyrene, fiberglass, clay, adobe, brick, stucco, slate, slab, and various other substrates. For residential, commercial and industrial applications.
ULTRA TEX™ TOP COAT
A non-textured coat of either ULTRA FINISH™, ULTRA SEAL™, ULTRA SATIN™, ULTRA KOTE™ or SATIN KOTE™ is required over ULTRA TEX™.
SURFACE PREPARATION:
Trenching is necessary to form a complete seal. Trench 4 to 6 inches around the perimeter of the structure. For proper adhesion it is essential that the surface be pressure washed at a minimum of 1500 P.S.I., using a water and chlorine solution, removing any loose, flaking or peeling paint along with any oil, grease, residues and especially mold, mildew and algae. Wire brush if necessary. ULTRA TEX™ will resist mildew growth, but will not kill mildew already on the surface. If the surface remains chalky or is in poor condition after cleaning, a coat of CHALK-FORCE™ or ULTRA PRIME™ will be necessary. Rusted or bare metal surfaces must be primed with METAL-PRIME RED-OX™, Red Iron Oxide Primer Sealer. For other surfaces or substrates inquire. Patch any holes, cracks, seams, imperfections, etc., with PERMAPATCH™, Waterproofing Caulk & Sealant.
APPLICATION PROCEDURE:
Stir well before using. Do not thin, use product as is. Do not apply when temperatures are below 40 degrees Fahrenheit or when humidity is very high. Do not apply when coating will be subjected to rain or heavy dew before it has had enough time to dry (approximately 4 to 6 hours). Dry time will vary depending on temperature, humidity and location. Product can be applied using brush, roller or spray. Hopper type spray equipment is recommended. Spread uniformly. If desired surface texture is not achieved, wait at least 12 hours, then, if needed, apply a second coat of ULTRA TEX™. At least one coat of ULTRA TEX™ and one coat of either ULTRA FINISH™, ULTRA SEAL™, ULTRA SATIN™, ULTRA KOTE™ or SATIN KOTE™ is required for warranty compliance.
CLEAN UP:
Clean up all spills, tools and overspray immediately while the coating is still wet with warm soapy water.
Data Sheet - ULTRA TEX™ Elastomeric Insulating Ceramic Sand or Coarse Texture Paint Datasheet