 |
 |
 |
 |
 |
 |
 |
 |
|
|
|
 |
|
 |
| NEW & IMPROVED PRODUCTS - (*Signifies Product is
Currently Available) |
 |
|
| *5900 |
ENVIROPOXY™ |
Two Component Waterborne Epoxy System
Excellent Durability & Chemical Resistance. |
CLEAR |
| Gloss |
Click for More Details |
Data/MSDS |
|
| *1000 |
ENVIRO-3000™ |
ZERO V.O.C. Ineterior Wall, Ceiling & Trim Paint. Low Odor, Green Product
Technology |
White/WB/DB/CB |
Flat/Satin |
Click for More Details |
Data/MSDS |
|
| *4195 |
TREAD
KOTE™ |
Elastomeric Protective Walkway Rubber Tire Surfacing
System for most surfaces and roofs. |
White
with Black |
| Flat |
Click for More Details |
Data/MSDS |
|
| *5840 |
ULTRATHANE-40™ |
Industrial
100% Urethane 40% Solids Clear Sealer Finish. Excellent Durability & Chemical
Resistance. |
CLEAR |
| Gloss |
Click for More Details |
Data/MSDS |
|
| *5820 |
ULTRATHANE-20™ |
Commercial
100% Urethane 20% Solids Clear Sealer Finish. Excellent Durability & Chemical
Resistance. |
CLEAR |
| Gloss |
Click for More Details |
Data/MSDS |
|
| *7010 |
LIQUI-TARP® |
Elastomeric
Modified Acrylic Waterproofing Temporary Protective Roof Sealer for Most Roofs. |
Blue/White/WB |
| Matte |
Click for More Details |
Data/MSDS |
|
| *7501 |
SHINGLE
SEALer™ |
100%
Acrylic Clear Finish Roof Shingle Sealer for Shingles & Most Other Sloped Roofing
Surfaces. |
Clear |
| Click Here for More Details |
Data/MSDS |
|
| *5450 |
CRETE-GRIP™ |
Acrylic
Adhesive Primer and Troubleshooting Bonder for Most Coated & Uncoated Deck/Floor
Surfaces. |
Clear |
| Click Here for More Details |
Data/MSDS |
|
| *7900 |
PERMAUREA™ |
Single
Component Waterbased 40% Solids POLYUREA Coating & Performance Additive for Most
Surfaces. |
Clear |
| Gloss |
Click for More Details |
Data/MSDS |
|
| *2740/1 |
STUKKOPATCH™ |
Pre-Mixed,
Ready-to-Use, Acrylic Waterproofing Stucco Look Textured Repair Patch, Crack Sealer &
Caulk. |
White |
| SAND or ROUGH - Click for
Details |
Data/MSDS |
|
| *757x |
METALUX™
Metal Look |
Elastomeric
Waterproofing and Latex Enamel Industrial (Flat/Satin/Semi-Gloss) Metallic Look Finishes. |
ELASTO Data |
| *407x |
ELASTOMERIC -
ENAMEL |
ENAM Data |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 ENVIROPOXY™ TWO COMPONENT WATERBORNE EPOXY SYSTEM
|
|
#5900-1 (1 Gallon
System) #5900-5 (4 Gallon System) |
Data/MSDS |
Two-Component,
hard finish, low V.O.C., environmentally safe, waterborne epoxy. It is easy to apply, has
low odor and high hiding characteristics. This product is tintable with waterbased
colorants, and is available in Tint, Deep & Clear bases and a non-pigmented clear
gloss finish. |
SPREAD
RATE: 200-300 square feet per gallon |
TECH DATA: Solids by Weight:
50% Solids by Volume:
40% Weight per Gallon: 10.1 lbs. |
|
|
ENVIRO-3000™ ZERO
V.O.C. Ceramic Interior Wall, Ceiling & Trim Paint |
|
#1000-1 & 1025-1
(1 Gallon) #1000-5 & 1025-5 (5
Gallon) #1000-55 & 1025-55 (55 Gallon) |
Data/MSDS |
ENVIRO-3000™
is a low odor, Zero V.O.C.* (Volatile Organic Compound), high quality, insulating ceramic,
interior wall, ceiling and trim paint. It is formulated with ceramic fillers, that provide
insulating and soundproofing characteristics along with a uniform, easy to apply,
excellent hiding latex finish. When applied according to specifications, the
ENVIRO-3000™ paint product line offers a 20 YEAR LIMITED MATERIAL WARRANTY. |
SPREAD
RATE: 250-400 square feet per gallon |
TECH DATA: Solids by Weight:
49% Solids by Volume:
32% Weight per Gallon: 10.8 lbs. |
|
|
TREAD KOTE™ PROTECTIVE WALKWAY SURFACING SYSTEM |
|
#4195-1 (1 Gallon)
#4195-5 (5
Gallon) #4195-55 (55 Gallon) |
Data/MSDS |
Impervious Cushioned Flooring System,
designed for a wide variety of Commercial and Industrial Applications. This system
is tintable allowing you to create a wide range of coordinated appearances and attractive
finish look. Cold, wet poured into a one piece monolithic surface, it is
an extremely durable yet flexible flooring and walkway solution. TREAD KOTE™ is made with crumb rubber (from recycled
tires) and a special elastomeric bonding agent. It complies fully with the Nationwide
Chemical Coating Manufacturers, Inc. standards for Green Product Technology. TREAD
KOTE™ provides excellent traction for added safety. The cushioned surface also makes
for more comfortable walking with less wear on legs. It is an easy to clean surface that
requires minimal maintenance promoting a hygienic environment. |
SPREAD
RATE: 10-25 square feet per gallon |
TECH DATA: Solids by Weight:
75% Solids by Volume:
70% Weight per Gallon: 11.9 lbs. |
|
|
ULTRATHANE-40™ 100% URETHANE 40% SOLIDS CLEAR GLOSS SEALER |
|
#5840-1 (1 Gallon)
#5840-5 (5
Gallon) #5840-55 (55 Gallon) |
Data/MSDS |
High
Performance Industrial Grade 100% Urethane 40% Solids Clear Gloss Sealer Finish. Excellent
Durability, Gloss, U.V. Resistance and Excellent Chemical Resistance. Can be used on most
any Interior or Exterior Coated or uncoated Substrates. Concrete, Masonry and Cementitious
Surfaces must be Previously Sealed, Primed or Coated. Excellent for use on Properly
Prepared HARD WOOD Decks and Surfaces. Gas, Fuel, Oil and Chemical Containment Coating. |
SPREAD
RATE: 300-350 square feet per gallon |
TECH DATA: Solids by Weight:
40% Solids by Volume:
38% Weight per Gallon: 8.8 lbs. |
|
|
ULTRATHANE-20™ 100% URETHANE 20% SOLIDS CLEAR GLOSS SEALER |
|
#5820-1 (1 Gallon)
#5820-5 (5
Gallon) #5820-55 (55 Gallon) |
Data/MSDS |
High
Performance Commercial Grade 100% Urethane 20% Solids Clear Gloss Sealer Finish. Excellent
Durability, Gloss, U.V. Resistance and Chemical Resistance. Can be used on most any
Interior or Exterior Coated or uncoated Substrates. Concrete, Masonry and Cementitious
Surfaces must be Previously Sealed, Primed or Coated. Great for use on Properly Prepared
HARD WOOD Decks and Surfaces. |
SPREAD
RATE: 300-350 square feet per gallon |
TECH DATA: Solids by Weight:
20% Solids by Volume:
19% Weight per Gallon: 8.5 lbs. |
|
|
LIQUI-TARP®
WATERPROOFING TEMPORARY ROOF SEALER COATING |
|
#7010x-1 (1 Gallon)
#7010x-5 (5
Gallon) #7010x-55 (55 Gallon) |
Data/MSDS |
Elastomeric
Modified Acrylic Matte Finish Blue or White Temporary Waterproofing and Protective Roof
Sealer Coating for most any Sloped Roof Surface. Designed to remedy and temporarily
protect damaged roofing surfaces until a more permanent roof can be installed. Excellent
Adhesion, Waterproofing, Mildew Resistance and Ultraviolet Ray Resistance. Excellent on
Shingles, Wood, Concrete, Masonry, Asphalt, Metal and more. LIQUI-TARP® is not Guaranteed
to Stop Leaks, but will effectively protect and reduce leaks with proper preparation and
application. WELL DRAINING ROOF SURFACES ONLY! |
SPREAD RATE: 75-150 square feet per gallon
 LIQUI-TARP® Brochure |
TECH DATA: Solids by Weight:
57% Solids by Volume:
40% Weight per Gallon: 10.2 lbs. |
|
|
SHINGLE SEALer™ WATERPROOFING
CLEAR ROOF PROTECTORANT |
|
#7501-1 (1 Gallon)
#7501-5 (5
Gallon) #7501-55 (55 Gallon) |
Data/MSDS |
High
Quality 100% Acrylic Clear Gloss Finish Roof Shingle Sealer for Preserving, Protecting and
Beautifying most any Sloped Roof Surface. Excellent for Shingle Roofs, Colored Roof
Surfaces, and Rejuvenating Skylights. Excellent on Wood, Concrete, Masonry, Asphalt,
Metal, Weathered Fiberglass and more. SLOPED
ROOFS ONLY. SHINGLE SEALER™ Press Release |
SPREAD RATE: 300-400 square feet per gallon SHINGLE SEALer™ Brochure |
TECH DATA: Solids by Weight:
27% Solids by Volume: 24%
Weight per Gallon: 8.8 lbs. |
|
|
CRETE-GRIP™ ADHESIVE PRIMER & TROUBLESHOOTING DECK BONDER |
|
#5450-1 (1
Gallon) #5450-5 (5
Gallon) #5450-55 (55 Gallon) |
Data/MSDS |
CRETE-GRIP™
is a clear, non-pigmented finish, acrylic adhesive, high-performance uncoated concrete and
previously coated concrete or deck surfaces, penetrating primer and troubleshooting
bonder. This is a low V.O.C. waterborne formulation of acrylic resin with high technology
fluorosurfactants which provides for exceptional adhesion, penetration and bonding
properties. Excellent penetration on porous surfaces and superior adhesion on non-porous
or compatible previously coated surfaces. Check for compatibility on previously coated
surfaces. Easy Application and Water Clean Up. |
SPREAD RATE: 350-400 square feet per gallon |
TECH DATA: Solids by Weight:
65% Solids by Volume:
65% Weight per Gallon: 8.4 lbs. |
|
|
PERMAUREA™ SINGLE COMPONENT POLYUREA COATING & ADDITIVE |
|
#7900-1 (1 Gallon)
#7900-5 (5
Gallon) #7900-55 (55 Gallon) |
Data/MSDS |
Single
Component Waterbased 40% Solids POLYUREA CLEAR Coating and Performance Additive for most
any surface. Can be added to most any latex product to increase performance of
adhesion, waterproofing, chemical resistance and durability. Excellent Resistance to
Chipping, Cracking, Peeling, Abrasion and Movement. Excellent Film Hardness with
Flexibility to provide Superior Adhesion, Waterproofing and Chemical and Abrasion
Resistance. |
SPREAD
RATE: 250-350 square feet per gallon |
TECH DATA: Solids by Weight:
40% Solids by Volume:
39% Weight per Gallon: 8.7 lbs. |
|
|
STUKKOPATCH™ CEMENTITOUS
SURFACE REPAIR & PATCH COMPOUND |
|
#2740X-1 (1 Gal.)
#2740x-5 (5 Gal.) #2740x-T (10.1 Oz.
Tube) #2740x-C (Case 12 Tubes) |
Data/MSDS |
Pre-Mixed, Ready-To-Use, Waterproofing Acrylic Stucco Finish
Textured Repair Patch, Crack Sealer & Caulking Compound for Chips, Cracks, Fractures
and Imperfections in Stucco, Masonry, Cement and most other Surfaces. Specify Sand(2740)
or Rough(2741) Texture Finish. |
SPREAD
RATE: 25-50 square feet per gallon |
TECH DATA: Solids by Weight:
88% Weight per Gallon: 14.0 lbs. |
|
|
METALUX™ ELASTO ELASTOMERIC
METALLIC LOOK FINISHES |
#7576 BRASS
#7577 BRONZE
#7578 COPPER
#7579 GOLD |
MATTE(m), SATIN(s) or SEMI-GLOSS(g) METALLIC FINISH - Other
Metallic Color Finishes Available |
 
 
|
#757x-5x
(5 Gallon) #757x-55x (55 Gallon) |
Data/MSDS |
METALUX™
ELASTO is an Elastomeric Acrylic, Ceramic Filled, Metallic Look, Protective Industrial
Coating designed for most any Interior or Exterior surface or substrate and can be used on
most sloped roofs. Excellent waterproofing, insulating and reflecting properties with a
beautiful Metallic Look MATTE, SATIN or SEMI-GLOSS Finish. It forms a durable rubber-like
Metallic Shield of protection that expands and contracts with varying hot and cold
temperatures, plus excellent resistance to thermal shock. An Energy Saving Reflective
Industrial Coating that offers superior mildew resistance, ceramic insulation &
soundproofing, excellent adhesion and U.V. ray reflectivity. It is an inexpensive solution
to metal replacement and renovation. METALUX™ ELASTO COPPER
Application Pictures |
SPREAD
RATE: 125-175 square feet per gallon
7 Year Limited Material Warranty |
TECH DATA: Solids by Weight:
52% Solids by Volume:
37% Weight per Gallon:
10.2 lbs. |
|
|
METALUX™ ENAM LATEX
ENAMEL METALLIC LOOK FINISHES |
#4075 SILVER #4076 BRASS #4077 BRONZE #4078 COPPER #4079 GOLD |
| SPECIFY: MATTE(m) or SEMI-GLOSS(G) -
Many Other Designer Metallic Finishes and Colors Available |
 
 
|
#407x-5x (5 Gallon)
#407x-55x (55 Gallon) |
Data/MSDS |
Quality
Acrylic Latex Enamel Metallic Look Decorative Industrial Coating. Excellent Durability and
Beautiful MATTE or SEMI-GLOSS Finish. Many other Decorative Metallic Look and Metal
Flake Colors Available. |
SPREAD RATE: 200-300 square feet per gallon |
TECH DATA: Solids by Weight: 47%
Weight per Gallon: 10.1 lbs. |
|
|
|
|
|
       -
NATIONWIDE's CONTACT INFORMATION:
Business Hours: (M-F 8am-5pm EST) |
Telephone: 941.753.7500 U.S.
Toll Free: 1.800.423.7264
Fax: 941.753.1773 (24 Hour Dedicated Fax) |
|
NATIONWIDE
CHEMICAL COATING MFRS., INC. |
|
7106 24th Court East |
Sarasota,
Florida U.S.A. 34243 |
E-mail: info@natcoat.net
Directory of Sales Associates
Web: webmaster@natcoat.net |
| |
|
|
EXCLUSIVITY:
Some
Nationwide Products are sold Exclusively by Dealers and/or Distributors in Select Areas
and Regions. |
LEAKS:
Leaks
resulting from acts of providence, owner or their agents, are not the responsibility of NCCMI
and under no circumstances shall NCCMI
be liable in any respects to the building, it’s
occupants, it’s
contents or for any consequential or incidental damages. Leaks are required to be repaired
prior to the application of any coating and therefore are not covered under any warranty. |
| LABOR:
Products
Warranties are Limited to Material Only (see Limitations below), Labor is not included.
Nationwide does not Warranty for Labor of any Kind. |
| LIMITATIONS:
Any
implied warranty, including warranty of fitness for a particular use
or purpose, and warranty of merchantability, is limited in duration to the express
warranty based on the Individual Product's Warranty, unless a shorter period is
permitted
by law. If no Warranty is stated for a specific product then the maximum warranty will be
One Year from date of Purchase. If a Product has a specific Warranty and a Warranty was
not applied for using a Warranty Registration Certificate, the maximum warranty will be
One Year from Date of Purchase. NCCMI shall not be liable for incidental
or consequential damages or for damage to the building, it’s
contents, or it’s
occupants. NCCMI's
liability is limited to the
reasonable replacement cost of product that has been fully paid for and shall be limited
to defective product in the affected area only, whether any claim against it
is based upon strict liability, negligence, breach of warranty or any other theory or
cause of action. Venue in reference to any Product of Nationwide shall be Manatee County,
Florida, U.S.A. |
| DISCLAIMER:
Information
presented on this Web Page or any other Web Page on Nationwide Chemical Coating Mfrs.,
Inc. Web Site has been compiled by sources to be reliable, and is accurate and reliable to
the best of our knowledge and belief, but is not guaranteed to be so. |
| Copyright
©1998-2008 NATIONWIDE CHEMICAL
COATING MFRS., INC. |
|
| www.nationwidecoating.com -
www.nationwidecoatings.net
- www.natcoat.net
- www.acrylocoat.com |
This Page was last updated on
Tuesday, September 02, 2008 |
|
