|
|
 |
 |
 |
 |
 |
 |
 |
|
|
|
|
|
 |
GO TO: CONCRETE COATINGS PAGE - GO TO: WOOD
COATINGS PAGE |
 |
| FLOOR, DECK & EPOXY COATINGS - Primers,
Coatings & Clears |
 |
|
| 5450 |
CRETE-GRIP™ |
Acrylic
Adhesive Primer and Troubleshooting Bonder for Most Coated & Uncoated Deck/Floor
Surfaces. |
CLEAR |
| Click Here for More Details |
Data/MSDS |
|
| 5460 |
CRETE-GUARD™ |
Acrylic
with Silicone, Penetrating Concrete Stain, Sealer, Preservative & Paint. Residential Grade |
White/WB/DB/CB |
| Satin |
Click for More Details |
Data/MSDS |
| 5495 |
CRETE-CLEAR™ |
Non-Yellowing
Clear Finish Click for More Details |
Data/MSDS |
|
| 5875 |
ACRATHANE™ |
Acrylic
Urethane with Silicone, Penetrating Concrete Stain, Sealer, Preservative & Paint. Commercial Grade |
White/WB/DB/CB |
| Satin |
Click for More Details |
Data/MSDS |
| 5895 |
ACRACLEAR™ |
Non-Yellowing
Clear Finish Click for More Details |
Data/MSDS |
|
| 4750 |
AQUAKOTE™ |
Urethane
Acrylic with Silicone, Penetrating Concrete Stain, Sealer, Preservative & Paint. Industrial Grade |
White/WB/DB/CB |
| Satin |
Click for More Details |
Data/MSDS |
| 4795 |
AQUACLEAR™ |
Non-Yellowing
Clear Finish Click for More Details |
Data/MSDS |
|
| 5840 |
ULTRATHANE-40™ |
Industrial
100% Urethane 40% Solids Clear Sealer Finish. Excellent Durability & Chemical
Resistance. |
CLEAR |
| Gloss |
Click for More Details |
Data/MSDS |
| 5820 |
ULTRATHANE-20™ |
Commercial
20% Solids Urethane Click for More Details |
Data/MSDS |
|
| 5900 |
ENVIROPOXY™ |
Two
Component Waterborne Epoxy System. Excellent Durability & Chemical Resistance. |
White/WB/DB/CB |
| Gloss |
Click for More Details |
Data/MSDS |
|
| 4195 |
TREAD
KOTE™ |
Elastomeric Protective Walkway Rubber Tire Surfacing
System for most surfaces and roofs. |
White
with Black |
| Flat |
Click for More Details |
Data/MSDS |
|
| 9250 |
SKID-EX™ |
Anti-Skid,
Anti-Slip Additive for Reducing Slip & Skid in Clears, Stains, Paints and Floor
Coatings. |
CLEAR |
| Click Here for More Details |
Data/MSDS |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
CRETE-GRIP™ ADHESIVE PRIMER & TROUBLESHOOTING DECK BONDER |
|
#5450-1 (1
Gallon) #5450-5 (5
Gallon) #5450-55 (55 Gallon) |
Data/MSDS |
| CRETE-GRIP™
is a clear, non-pigmented finish, acrylic adhesive, high-performance uncoated concrete and
previously coated concrete or deck surfaces, penetrating primer and troubleshooting
bonder. This is a low V.O.C. waterborne formulation of acrylic resin with high technology
fluorosurfactants which provides for exceptional adhesion, penetration and bonding
properties. Excellent penetration on porous surfaces and superior adhesion on non-porous
or compatible previously coated surfaces. Check for compatibility on previously coated
surfaces. Easy Application and Water Clean Up. |
SPREAD RATE: 300-400 square feet per gallon |
TECH DATA: Solids by Weight:
65% Solids by Volume:
65% Weight per Gallon: 8.4 lbs. |
|
|
CRETE-GUARD™ CONCRETE STAIN & FLOOR PAINT (RESIDENTIAL GRADE) |
SATIN |
#5460-1 (1 Gallon)
#5460-5 (5 Gallon)
#5460-55 (55 Gallon) |
Data/MSDS |
| RESIDENTIAL
GRADE - Waterbase Acrylic with Silicone, Penetrating Concrete Stain, Sealer, Preservative
and Concrete Paint. Effectively Protects against Efflorescence, Chalking, Erosion &
Cracking. For Uncoated or Previously Coated/Stained Surfaces. Excellent Adhesion with
Abrasion, Chemical, U.V., and Hot Tire Pick Up Resistance. Check for compatibility on
previously coated surfaces. Easy Application and Water Clean Up. |
|
WHITE/WHITE Base/DEEP Base/CLEAR Base
- SPREAD RATE: 300-400 square feet per
gallon |
TECH DATA: Solids by
Weight: 40% Solids by Volume:
30% Weight per Gallon: 10.2 lbs. |
|
|
CRETE-CLEAR™ ACRYLIC PROTECTIVE CLEAR SEALER (RESIDENTIAL GRADE) |
CLEAR |
#5495-1 (1 Gallon)
#5495-5 (5 Gallon)
#5495-55 (55 Gallon) |
Data/MSDS |
| RESIDENTIAL
GRADE - Waterbase Acrylic with Silicone, Clear Penetrating Concrete Sealer, Preservative
and Concrete Paint Sealer. Non-Yellowing Clear Sealer that effectively Protects against
Efflorescence, Chalking, Erosion & Cracking. For Uncoated or Previously Coated/Stained
Surfaces. Excellent Adhesion with Abrasion, Chemical, U.V., and Hot Tire Pick Up
Resistance. Check for compatibility on previously coated surfaces. Easy Application and
Water Clean Up. |
 |
CLEAR FINISH -
SPREAD RATE: 300-400 square feet per gallon |
TECH DATA: Solids by
Weight: 28% Solids by Volume: 27%
Weight per Gallon: 8.6 lbs. |
|
|
ACRATHANE™ CONCRETE STAIN & FLOOR PAINT (COMMERCIAL GRADE) |
SATIN |
#5875-1 (1 Gallon)
#5875-5 (5 Gallon)
#5875-55 (55 Gallon) |
Data/MSDS |
| COMMERCIAL
GRADE - Waterbase Acrylic Urethane with Silicone, Penetrating Concrete Stain, Sealer,
Preservative and Concrete Paint. Effectively Protects against Efflorescence, Chalking,
Erosion & Cracking. For Uncoated or Previously Coated/Stained Surfaces. Excellent
Adhesion with Abrasion, Chemical, U.V., and Hot Tire Pick Up Resistance. Check for
compatibility on previously coated surfaces. Easy Application and Water Clean Up. |
 |
WHITE/WHITE Base/DEEP Base/CLEAR Base
- SPREAD RATE: 300-400 square feet per
gallon |
TECH DATA: Solids by
Weight: 41% Solids by Volume:
31% Weight per Gallon: 10.3 lbs. |
|
|
ACRACLEAR™ ACRYLIC PROTECTIVE CLEAR SEALER (COMMERCIAL GRADE) |
CLEAR |
#5895-1 (1 Gallon)
#5895-5 (5 Gallon)
#5895-55 (55 Gallon) |
Data/MSDS |
| COMMERCIAL
GRADE - Waterbase Acrylic Urethane with Silicone, Clear Penetrating Concrete Sealer,
Preservative and Concrete Paint Sealer. Non-Yellowing Clear Sealer that effectively
Protects against Efflorescence, Chalking, Erosion & Cracking. For Uncoated or
Previously Coated/Stained Surfaces. Excellent Adhesion with Abrasion, Chemical, U.V., and
Hot Tire Pick Up Resistance. Check for compatibility on previously coated surfaces. Easy
Application and Water Clean Up. |
 |
CLEAR FINISH -
SPREAD RATE: 300-400 square feet per gallon |
TECH DATA: Solids by
Weight: 29% Solids by Volume: 28%
Weight per Gallon: 8.6 lbs. |
|
|
AQUAKOTE™ CONCRETE STAIN & FLOOR PAINT (INDUSTRIAL GRADE) |
SATIN |
#4750-1 (1 Gallon)
#4750-5 (5 Gallon)
#4750-55 (55 Gallon) |
Data/MSDS |
| INDUSTRIAL
GRADE - Waterbase Urethane Acrylic with Silicone, Penetrating Concrete Stain, Sealer,
Preservative and Concrete Paint. Effectively Protects against Efflorescence, Chalking,
Erosion & Cracking. For Uncoated or Previously Coated/Stained Surfaces. Excellent
Adhesion with Abrasion, Chemical, U.V., and Hot Tire Pick Up Resistance. Check for
compatibility on previously coated surfaces. Easy Application and Water Clean Up. |
 |
WHITE/WHITE Base/DEEP Base/CLEAR Base
- SPREAD RATE: 300-400 square feet per
gallon |
TECH DATA: Solids by
Weight: 44% Solids by Volume:
33% Weight per Gallon: 10.2 lbs. |
|
|
AQUACLEAR™ ACRYLIC PROTECTIVE CLEAR SEALER (INDUSTRIAL GRADE) |
CLEAR |
#4795-1 (1 Gallon)
#4795-5 (5 Gallon)
#4795-55 (55 Gallon) |
Data/MSDS |
| INDUSTRIAL
GRADE - Waterbase Urethane Acrylic with Silicone, Clear Penetrating Concrete Sealer,
Preservative and Concrete Paint Sealer. Non-Yellowing Clear Sealer that effectively
Protects against Efflorescence, Chalking, Erosion & Cracking. For Uncoated or
Previously Coated/Stained Surfaces. Excellent Adhesion with Abrasion, Chemical, U.V., and
Hot Tire Pick Up Resistance. Check for compatibility on previously coated surfaces. Easy
Application and Water Clean Up. |
 |
CLEAR FINISH -
SPREAD RATE: 300-400 square feet per gallon |
TECH DATA: Solids by
Weight: 30% Solids by Volume: 28%
Weight per Gallon: 8.7 lbs. |
|
|
ULTRATHANE-40™ 100% URETHANE 40% SOLIDS CLEAR GLOSS SEALER |
|
#5840-1 (1 Gallon)
#5840-5 (5
Gallon) #5840-55 (55 Gallon) |
Data/MSDS |
| High Performance
Industrial Grade 100% Urethane 40% Solids Clear Gloss Sealer Finish. Excellent Durability,
Gloss, U.V. Resistance and Excellent Chemical Resistance. Can be used on most any Interior
or Exterior Coated or uncoated Substrates. Concrete, Masonry and Cementitious Surfaces
must be Previously Sealed, Primed or Coated. Excellent for use on Properly Prepared HARD
WOOD Decks and Surfaces. Gas, Fuel, Oil and Chemical Containment Coating. |
SPREAD
RATE: 300-350 square feet per gallon |
TECH DATA: Solids by Weight:
40% Solids by Volume:
38% Weight per Gallon: 8.8 lbs. |
|
|
ULTRATHANE-20™ 100% URETHANE 20% SOLIDS CLEAR GLOSS SEALER |
|
#5820-1 (1 Gallon)
#5820-5 (5
Gallon) #5820-55 (55 Gallon) |
Data/MSDS |
| High Performance
Commercial Grade 100% Urethane 20% Solids Clear Gloss Sealer Finish. Excellent Durability,
Gloss, U.V. Resistance and Chemical Resistance. Can be used on most any Interior or
Exterior Coated or uncoated Substrates. Concrete, Masonry and Cementitious Surfaces must
be Previously Sealed, Primed or Coated. Great for use on Properly Prepared HARD WOOD Decks
and Surfaces. |
SPREAD
RATE: 300-350 square feet per gallon |
TECH DATA: Solids by Weight:
20% Solids by Volume:
19% Weight per Gallon: 8.5 lbs. |
|
|
 ENVIROPOXY™ TWO COMPONENT WATERBORNE EPOXY SYSTEM
|
|
#5900-1 (1 Gallon
System) #5900-5 (4 Gallon System) |
Data/MSDS |
Two-Component,
hard finish, low V.O.C., environmentally safe, waterborne epoxy. It is easy to apply, has
low odor and high hiding characteristics. This product is tintable with waterbased
colorants, and is available in Tint, Deep & Clear bases and a non-pigmented clear
gloss finish. |
SPREAD
RATE: 200-300 square feet per gallon |
TECH DATA: Solids by Weight:
50% Solids by Volume:
40% Weight per Gallon: 10.1 lbs. |
|
|
TREAD KOTE™ PROTECTIVE WALKWAY SURFACING SYSTEM |
|
#4195-1 (1 Gallon)
#4195-5 (5
Gallon) #4195-55 (55 Gallon) |
Data/MSDS |
Impervious Cushioned Flooring System,
designed for a wide variety of Commercial and Industrial Applications. This system
is tintable allowing you to create a wide range of coordinated appearances and attractive
finish look. Cold, wet poured into a one piece monolithic surface, it is
an extremely durable yet flexible flooring and walkway solution. TREAD KOTE™ is made with crumb rubber (from recycled
tires) and a special elastomeric bonding agent. It complies fully with the Nationwide
Chemical Coating Manufacturers, Inc. standards for Green Product Technology. TREAD
KOTE™ provides excellent traction for added safety. The cushioned surface also makes
for more comfortable walking with less wear on legs. It is an easy to clean surface that
requires minimal maintenance promoting a hygienic environment. |
SPREAD
RATE: 10-25 square feet per gallon |
TECH DATA: Solids by Weight:
75% Solids by Volume:
70% Weight per Gallon: 11.9 lbs. |
|
|
SKID-EX™ CLEAR
SAND NON-SKID & NON-SLIP RESISTANCE ADDITIVE |
|
#9250-1 (8 ounces)
#9250-5 (40 Ounces) |
Data/MSDS |
| An Anti-Skid, Anti-Slip
Additive for use in most any Latex based Clear Coat, Paint or Stain. For Reducing Slip and
Skid on Slippery Coated Surfaces. This Product will help reduce slip but is NOT Guaranteed
to Eliminate Slipping or Falling. |
RECOMMENDED ADD LEVELS: 8 to 16 Ounces per Gallon - 40 to 80 Ounces per Five Gallons |
|
|
|
|
|
-
      
-
NATIONWIDE's CONTACT INFORMATION:
Business Hours: (M-F 8am-5pm EST) |
Telephone: 941.753.7500 U.S.
Toll Free: 1.800.423.7264
Fax: 941.753.1773 (24 Hour Dedicated Fax) |
 |
NATIONWIDE
CHEMICAL COATING MFRS., INC. |
 |
7106 24th Court East |
Sarasota,
Florida U.S.A. 34243 |
E-mail: info@natcoat.net
Web: webmaster@natcoat.net |
|
 |
Directory of
Nationwide Sales Associates |
 |
EXCLUSIVITY:
Some
Nationwide Products are sold Exclusively by Dealers and/or Distributors in Select Areas
and Regions. |
LEAKS:
Leaks
resulting from acts of providence, owner or their agents, are not the responsibility of NCCMI
and under no circumstances shall NCCMI
be liable in any respects to the building, it’s
occupants, it’s
contents or for any consequential or incidental damages. Leaks are required to be repaired
prior to the application of any coating and therefore are not covered under any warranty. |
| LABOR:
Products
Warranties are Limited to Material Only (see Limitations below), Labor is not included.
Nationwide does not Warranty for Labor of any Kind. |
| LIMITATIONS:
Any
implied warranty, including warranty of fitness for a particular use
or purpose, and warranty of merchantability, is limited in duration to the express
warranty based on the Individual Product's Warranty, unless a shorter period is
permitted
by law. If no Warranty is stated for a specific product then the maximum warranty will be
One Year from date of Purchase. If a Product has a specific Warranty and a Warranty was
not applied for using a Warranty Registration Certificate, the maximum warranty will be
One Year from Date of Purchase. NCCMI shall not be liable for incidental
or consequential damages or for damage to the building, it’s
contents, or it’s
occupants. NCCMI's
liability is limited to the
reasonable replacement cost of product that has been fully paid for and shall be limited
to defective product in the affected area only, whether any claim against it
is based upon strict liability, negligence, breach of warranty or any other theory or
cause of action. Venue in reference to any Product of Nationwide shall be Manatee County,
Florida, U.S.A. |
| DISCLAIMER:
Information
presented on this Web Page or any other Web Page on Nationwide Chemical Coating Mfrs.,
Inc. Web Site has been compiled by sources to be reliable, and is accurate and reliable to
the best of our knowledge and belief, but is not guaranteed to be so. |
|
Copyright
©1998-2010 NATIONWIDE CHEMICAL
COATING MFRS., INC. |
|
| www.nationwidecoating.com -
www.nationwidecoatings.net
- www.natcoat.net
- www.acrylocoat.com |
This Page was last updated on
Monday, August 31, 2009 |
|
