NationwideCoatings.com Navigation Tool Bar; Select and Click on the Link to View Your Interest

NationwideCoatings.com HOME PAGE NationwideCoatings.com NEWS PAGE NationwideCoatings.com PRODUCTS PAGE REQUEST INFORMATION FORM PAGE ORDERS and PRICING PAGE NationwideCoatings.com FORMS FREQUENTLY ASKED QUESTIONS PAGE

Concrete and Masonry Sealers, Stains, Paints, Primers, Clears and Supplies Page Banner

ACRYLOCOAT Home Page Button Metallux-3.jpg (17400 bytes) STUKKOPATCH Pre-Mixed & Ready-To-Use Stucco and Textured Surface Repair Patch
Find a Nationwide Dealer Near You Material Estimates Page Application Pictures Page NationwideCoatings.com REFERENCES PAGE Application Procedures Page Product Testing Page NationwideCoatings.com Business Opportunities Page

ELASTOMERIC ROOF COATINGS, SEALERS and CLEAR FINISHES

GO TO: FLOOR, DECK & EPOXY PAGE    -     GO TO: WOOD COATINGS PAGE
ROOF PRIMERS, CAULKING, TAPE, MATTING and SUPPLIES
CONCRETE COATINGS - Sealers, Stains, Paints, Primers & Supplies Information Request Form Button
5400 PRO-SEAL LINK™ 50% Solids Vinyl Acrylic Latex Resin Multi-Purpose Bonding Sealer. Excellent Stucco & Tile Undercoat.   CLEAR
Click Here for More Details Data/MSDS
5410 CRETE-MOD Acrylic Polymer Waterproofing Cement Modifier Strengthener for Trowelable Mortar, Cement, Masonry & Stucco Mixtures. CLEAR
Click Here for More Details Data/MSDS
2595 CHALK FORCE™ Acrylic-Epoxy Chalk Sealer, High pH Sealer & Surface Conditioner for Concrete & most other Surfaces. CLEAR
Click Here for More Details Data/MSDS
9000 ECO-REZIN™ 50% Solids Elastomeric Adhesive Waterproofing Resin Primer & Sealer & Performance Additive. CLEAR
Click Here for More Details Data/MSDS
5450 CRETE-GRIP™ Acrylic Epoxy Ester, Primer & Troubleshooting Adhesive Bonder for Most Deck/Floor Surfaces. CLEAR
Click Here for More Details Data/MSDS
5460 CRETE-GUARD™ Acrylic Penetrating Concrete Stain, Sealer, Preservative & Paint. Residential Grade White/WB/DB/CB
Satin Click for More Details Data/MSDS
5495 CRETE-CLEAR™ Non-Yellowing Clear Finish. Click for More Details Data/MSDS
5875 ACRATHANE™ Acrylic Penetrating Concrete Stain, Sealer, Preservative & Paint. Commercial Grade White/WB/DB/CB
Satin Click for More Details Data/MSDS
5895 ACRACLEAR™ Non-Yellowing Clear Finish. Click for More Details Data/MSDS
4750 AQUAKOTE™ Acrylic Penetrating Concrete Stain, Sealer, Preservative & Paint. Industrial Grade White/WB/DB/CB
Satin Click for More Details Data/MSDS
4795 AQUACLEAR™ Non-Yellowing Clear Finish. Click for More Details Data/MSDS
5840 ULTRATHANE-40™ Industrial 100% Urethane 40% Solids Clear Sealer Finish. Excellent Durability & Chemical Resistance. CLEAR
Gloss Click for More Details Data/MSDS
5820 ULTRATHANE-20™ Commercial 20% Solids Urethane. Click for More Details Data/MSDS
5900 ENVIROPOXY™ Two Component Waterborne Epoxy System Excellent Durability & Chemical Resistance. White/WB/DB/CB
Gloss Click for More Details Data/MSDS
5500 WATERSEAL™ Acrylic with Silicone, Non-Yellowing Protective Clear Vertical Surface Water Sealer and Preservative. CLEAR
Click Here for More Details Data/MSDS
9250 SKID-EX™ Anti-Skid, Anti-Slip Additive for Reducing Slip & Skid in Clears, Stains, Paints and Floor Coatings. CLEAR
Click Here for More Details Data/MSDS
5852 ULTRA GRIP™ Waterproofing Hydrostatic Pressure Resistant, Textured Concrete & Masonry Coating WHITE
Flat Click for More Details Datasheet
5850 ULTRA GRIP CLEAR™ Clear Waterproofing Hydrostatic Pressure Resistant Concrete & Masonry Coating CLEAR
Gloss Click for More Details Datasheet
5854 ULTRA GRIP PLUS™ Extra Waterproofing Hydrostatic Pressure Resistant Concrete & Masonry Coating WHITE
Flat Click for More Details Datasheet
5851 ULTRA SALTSHIELD™ Clear Waterproofing Concrete & Masonry - Salt & Efflorescence Protective Coating CLEAR
Satin Click for More Details Datasheet
5842 ULTRA GRIP DRY MIX™ White Waterproofing Powdered Masonry Coating WHITE
Flat Click for More Details Datasheet
Green Products
Nationwide's Ceramic Interior Wall, Trim & Ceiling Paints and Primers Nationwide's Ceramic Exterior Wall & Trim House Paints and Primers
ELASTOMERIC CERAMIC WALL COATINGS and CLEAR SEALERS
ELASTOMERIC SPRAY-ON TEXTURE COATINGS
ACRYLOCOAT Stucco-Look Acrylic Wall Systems
CONCRETE STAINS, PAINTS, SEALERS and CLEAR COATS

Floor, Deck and Epoxy Coatings

WOOD STAINS, SEALERS and CLEAR COATS
METAL and INDUSTRIAL COATINGS
ELASTOMERIC SPECIALTY COATINGS
MISCELLANEOUS SPECIALTY PRODUCTS
METALLIC-LOOK FINISH INDUSTRIAL PAINTS and COATINGS
TOOLS, SUNDRIES, SUPPLIES, COLORANTS, SALES, MARKETING and MISC. ITEMS
NEW & IMPROVED PRODUCTS and Research and Development

PRO-SEAL LINK™ VINYL ACRYLIC RESIN SEALER & BONDING UNDERCOAT

50% Solids

PRO-SEAL LINK™

#5400-1 (1 Gallon)           #5400-5 (5 Gallon)           #5400-55 (55 Gallon)

Data/MSDS

Quality 50% Solids Vinyl Acrylic Latex Resin. Multi-Purpose Waterproofing, Sealing and Bonding Undercoat. Primarily used for Undercoating Surfaces before Stucco and Tile Applications. Excellent Binder for use in Concrete and Masonry Mixtures to Reduce Cracking. Non-pigmented, Vinyl Acrylic Resin that exhibits Excellent Adhesion and Bonding. For uncoated and previously coated surfaces. Pro-Seal Link can not be used as a Finish or Final Coat.

SPREAD RATE: 250-350 square feet per gallon

TECH DATA:     Solids by Weight: 50%          Solids by Volume: 48%          Weight per Gallon: 8.7 lbs.

CRETE-MOD ACRYLIC POLYMER CEMENT MODIFIER

CRETE-MOD™

#5410-1 (1 Gallon)           #5410-5 (5 Gallon)           #5410-55 (55 Gallon)

Data/MSDS

Quality Low Odor Acrylic Polymer Additive Cement Modifier for Strengthening and Waterproofing most any Cementitious Mixture including Cement, Masonry, Stucco, Trowelable Mortar and Spray Crete Deck Finishes. Excellent Waterproofing Ultraviolet Resistant Binder Additive for use in Concrete and Masonry Mixtures to Reduce Cracking and Increase Strength and Durability.

ADDITION RATE: Approximately 2.5 Quarts per 50 pounds

TECH DATA:     Solids by Weight: 48%          Solids by Volume: 46%          Weight per Gallon: 8.8 lbs.

CHALK FORCE™ EPOXY ACRYLIC CHALK & High-pH CLEAR SEALER

CHALK FORCE™ Surface Conditioner

#2595-1 (1 Gallon)           #2595-5 (5 Gallon)           #2595-55 (55 Gallon)

Data/MSDS

Quality Epoxy-Acrylic Clear Finish Chalk Sealer and High pH Surface Sealer and Conditioner. Seals Chalky Surfaces Providing a Firm Surface for Paints or Coatings. Seals High pH Cementitious Surfaces Eliminating the Waiting Period for Concrete, Cement, Mortar and Stucco to Cure.

SPREAD RATE: 300-400 square feet per gallon

TECH DATA:     Solids by Weight: 9%          Solids by Volume: 8%          Weight per Gallon: 8.9 lbs.

ECO-REZIN™ CLEAR ACRYLIC WATERPROOFING ELASTOMERIC ADHESIVE

ECO-REZIN™

#9000-1 (1 Gallon)           #9000-5 (5 Gallon)           #9000-55 (55 Gallon)

Data/MSDS

Transparent Clear, Elastomeric Acrylic Waterproofing Adhesive 50% Solids Resin. Formulated for Today's Environment. Superior Adhesion to most any Substrate including Wood, Metal and Concrete.

SPREAD RATE: 150-250 square feet per gallon

TECH DATA:     Solids by Weight: 50%          Solids by Volume: n/a          Weight per Gallon: 8.8 lbs.

CRETE-GRIP™ ADHESIVE PRIMER & TROUBLESHOOTING DECK BONDER

CRETE-GRIP™

#5450-1 (1 Gallon)          #5450-5 (5 Gallon)          #5450-55 (55 Gallon)

Data/MSDS

CRETE-GRIP™ is a clear, non-pigmented, acrylic epoxy ester, penetrating primer for use over uncoated concrete surfaces. CRETE-GRIP™ is a low V.O.C. waterborne coating which will produce exceptional adhesion, penetration and bonding properties to porous concrete surfaces and superior adhesion and penetration to smooth troweled concrete. CRETE-GRIP™ will reduce most problems associated with concrete stains and paints when used as a primer coat. It is excellent for use as a bonding adhesive coat to remedy most defective areas of a previously coated concrete stain or paint application, when failure is down to bare concrete.

SPREAD RATE: 200-300 square feet per gallon

TECH DATA:     Solids by Weight: 20%              Solids by Volume: 18%            Weight per Gallon: 8.4 lbs.

CRETE-GUARD™ CONCRETE STAIN & FLOOR PAINT (RESIDENTIAL GRADE)

SATIN

#5460-1 (1 Gallon)           #5460-5 (5 Gallon)           #5460-55 (55 Gallon)

Data/MSDS

RESIDENTIAL GRADE - Waterbase Acrylic Penetrating Concrete Stain, Sealer, Preservative and Concrete Paint. Effectively Protects against Efflorescence, Chalking, Erosion & Cracking. For Uncoated or Previously Coated/Stained Surfaces. Excellent Adhesion with Abrasion, Chemical, U.V., and Hot Tire Pick Up Resistance. Check for compatibility on previously coated surfaces. Easy Application and Water Clean Up.

CRETE GUARD™

WHITE/WHITE Base/DEEP Base/CLEAR Base      -     SPREAD RATE: 300-400 square feet per gallon

TECH DATA:     Solids by Weight: 40%          Solids by Volume: 30%          Weight per Gallon: 10.2 lbs.

CRETE-CLEAR™ ACRYLIC PROTECTIVE CLEAR SEALER (RESIDENTIAL GRADE)

CLEAR

#5495-1 (1 Gallon)           #5495-5 (5 Gallon)           #5495-55 (55 Gallon)

Data/MSDS

RESIDENTIAL GRADE - Waterbase Acrylic Clear Penetrating Concrete Sealer, Preservative and Concrete Paint Sealer. Non-Yellowing Clear Sealer that effectively Protects against Efflorescence, Chalking, Erosion & Cracking. For Uncoated or Previously Coated/Stained Surfaces. Excellent Adhesion with Abrasion, Chemical, U.V., and Hot Tire Pick Up Resistance. Check for compatibility on previously coated surfaces. Easy Application and Water Clean Up.

CRETE CLEAR™

CLEAR FINISH     -      SPREAD RATE: 300-400 square feet per gallon

TECH DATA:     Solids by Weight: 28%          Solids by Volume: 27%          Weight per Gallon: 8.6 lbs.

ACRATHANE™ CONCRETE STAIN & FLOOR PAINT (COMMERCIAL GRADE)

SATIN

#5875-1 (1 Gallon)           #5875-5 (5 Gallon)           #5875-55 (55 Gallon)

Data/MSDS

COMMERCIAL GRADE - Waterbase Acrylic Penetrating Concrete Stain, Sealer, Preservative and Concrete Paint. Effectively Protects against Efflorescence, Chalking, Erosion & Cracking. For Uncoated or Previously Coated/Stained Surfaces. Excellent Adhesion with Abrasion, Chemical, U.V., and Hot Tire Pick Up Resistance. Check for compatibility on previously coated surfaces. Easy Application and Water Clean Up.

ACRATHANE™

WHITE/WHITE Base/DEEP Base/CLEAR Base      -     SPREAD RATE: 300-400 square feet per gallon

TECH DATA:     Solids by Weight: 41%          Solids by Volume: 31%          Weight per Gallon: 10.3 lbs.

ACRACLEAR™ ACRYLIC PROTECTIVE CLEAR SEALER (COMMERCIAL GRADE)

CLEAR

#5895-1 (1 Gallon)           #5895-5 (5 Gallon)           #5895-55 (55 Gallon)

Data/MSDS

COMMERCIAL GRADE - Waterbase Acrylic Clear Penetrating Concrete Sealer, Preservative and Concrete Paint Sealer. Non-Yellowing Clear Sealer that effectively Protects against Efflorescence, Chalking, Erosion & Cracking. For Uncoated or Previously Coated/Stained Surfaces. Excellent Adhesion with Abrasion, Chemical, U.V., and Hot Tire Pick Up Resistance. Check for compatibility on previously coated surfaces. Easy Application and Water Clean Up.

ACRACLEAR™

CLEAR FINISH     -      SPREAD RATE: 300-400 square feet per gallon

TECH DATA:     Solids by Weight: 29%          Solids by Volume: 28%          Weight per Gallon: 8.6 lbs.

AQUAKOTE™ CONCRETE STAIN & FLOOR PAINT (INDUSTRIAL GRADE)

SATIN

#4750-1 (1 Gallon)           #4750-5 (5 Gallon)           #4750-55 (55 Gallon)

Data/MSDS

INDUSTRIAL GRADE - Waterbase Penetrating Concrete Stain, Sealer, Preservative and Concrete Paint. Effectively Protects against Efflorescence, Chalking, Erosion & Cracking. For Uncoated or Previously Coated/Stained Surfaces. Excellent Adhesion with Abrasion, Chemical, U.V., and Hot Tire Pick Up Resistance. Check for compatibility on previously coated surfaces. Easy Application and Water Clean Up.

AQUAKOTE™

WHITE/WHITE Base/DEEP Base/CLEAR Base      -     SPREAD RATE: 300-400 square feet per gallon

TECH DATA:     Solids by Weight: 44%          Solids by Volume: 33%          Weight per Gallon: 10.2 lbs.

AQUACLEAR™ ACRYLIC PROTECTIVE CLEAR SEALER (INDUSTRIAL GRADE)

CLEAR

#4795-1 (1 Gallon)           #4795-5 (5 Gallon)           #4795-55 (55 Gallon)

Data/MSDS

INDUSTRIAL GRADE - Waterbase Clear Penetrating Concrete Sealer, Preservative and Concrete Paint Sealer. Non-Yellowing Clear Sealer that effectively Protects against Efflorescence, Chalking, Erosion & Cracking. For Uncoated or Previously Coated/Stained Surfaces. Excellent Adhesion with Abrasion, Chemical, U.V., and Hot Tire Pick Up Resistance. Check for compatibility on previously coated surfaces. Easy Application and Water Clean Up.

AQUACLEAR™

CLEAR FINISH     -      SPREAD RATE: 300-400 square feet per gallon

TECH DATA:     Solids by Weight: 30%          Solids by Volume: 28%          Weight per Gallon: 8.7 lbs.

ULTRATHANE-40™ 100% URETHANE 40% SOLIDS CLEAR GLOSS SEALER

ULTRATHANE-40™

#5840-1 (1 Gallon)          #5840-5 (5 Gallon)          #5840-55 (55 Gallon)

Data/MSDS

High Performance Industrial Grade 100% Urethane 40% Solids Clear Gloss Sealer Finish. Excellent Durability, Gloss, U.V. Resistance and Excellent Chemical Resistance. Can be used on most any Interior or Exterior Coated or uncoated Substrates. Concrete, Masonry and Cementitious Surfaces must be Previously Sealed, Primed or Coated. Excellent for use on Properly Prepared HARD WOOD Decks and Surfaces. Gas, Fuel, Oil and Chemical Containment Coating.

SPREAD RATE: 300-350 square feet per gallon

TECH DATA:     Solids by Weight: 40%          Solids by Volume: 38%          Weight per Gallon: 8.8 lbs.

ULTRATHANE-20™ 100% URETHANE 20% SOLIDS CLEAR GLOSS SEALER

ULTRATHANE-40™

#5820-1 (1 Gallon)          #5820-5 (5 Gallon)          #5820-55 (55 Gallon)

Data/MSDS

High Performance Commercial Grade 100% Urethane 20% Solids Clear Gloss Sealer Finish. Excellent Durability, Gloss, U.V. Resistance and Chemical Resistance. Can be used on most any Interior or Exterior Coated or uncoated Substrates. Concrete, Masonry and Cementitious Surfaces must be Previously Sealed, Primed or Coated. Great for use on Properly Prepared HARD WOOD Decks and Surfaces.

SPREAD RATE: 300-350 square feet per gallon

TECH DATA:     Solids by Weight: 20%          Solids by Volume: 19%          Weight per Gallon: 8.5 lbs.

smallnew.gif (926 bytes)ENVIROPOXY™ TWO COMPONENT WATERBORNE EPOXY SYSTEM

ENVIROPOXY™

#5900-1 (1 Gallon System)          #5900-5 (4 Gallon System)

Data/MSDS

Two-Component, hard finish, low V.O.C., environmentally safe, waterborne epoxy. It is easy to apply, has low odor and high hiding characteristics. This product is tintable with waterbased colorants, and is available in Tint, Deep & Clear bases and a non-pigmented clear gloss finish.

SPREAD RATE: 200-300 square feet per gallon

TECH DATA:     Solids by Weight: 50%          Solids by Volume: 40%          Weight per Gallon: 10.1 lbs.

WATERSEAL™ CLEAR CEMENT, MASONRY, STONE & BRICK SEALER

WATERSEAL™

#5500-1 (1 Gallon)           #5500-5 (5 Gallon)           #5500-55 (55 Gallon)

Data/MSDS

Deep Penetrating and Waterproofing Acrylic with Silicone, Sealer and Preservative. Non-Yellowing Clear Sealer. Effectively Protects against Efflorescence, Chalking, Erosion & Cracking. For uncoated or previously coated wall surfaces. Easy Application and Water Clean Up.

SPREAD RATE: 350-450 square feet per gallon

TECH DATA:     Solids by Weight: 21%         Solids by Volume: 19%       Weight per Gallon: 8.5 lbs.

SKID-EX™ CLEAR SAND NON-SKID & NON-SLIP RESISTANCE ADDITIVE

SKID-EX™

#9250-1 (8 ounces)        #9250-5 (40 Ounces)

Data/MSDS

An Anti-Skid, Anti-Slip Additive for use in most any Latex based Clear Coat, Paint or Stain. For Reducing Slip and Skid on Slippery Coated Surfaces. This Product will help reduce slip but is NOT Guaranteed to Eliminate Slipping or Falling.

RECOMMENDED ADD LEVELS: 8 to 16 Ounces per Gallon - 40 to 80 Ounces per Five Gallons

ULTRA GRIP™ Waterproofing Hydrostatic Coating

ULTRA GRIP™

#5852-1 (1 Gallon)        #5852-5 (5 Gallon)

Datasheet

ULTRA GRIP™ is a bright extra white, light textured finish, high-performance commercial grade 10 year, concrete & masonry waterproofing coating. Waterproofing resin modified with flexible encapsulated polymers which penetrate into the masonry for the ultimate in waterproofing protection. This new technology has excellent penetration on porous surfaces and will resist up to 10 psi of negative or positive hydrostatic pressure, which is the equivalent of a 22 foot high wall of water. It will also reduce penetration by radon gas. ULTRA GRIP™ is formulated with an environmentally friendly biocide to resist mildew growth. Conforms to ASTM D-7088 Resistance to Hydrostatic Pressure and ASTM D-6904 Resistance to Wind Driven Rain.

SPREAD RATE: 75-100 square feet per gallon

TECH DATA:     Solids by Weight: 65%         Solids by Volume: 50%       Weight per Gallon: 12.0 lbs.

ULTRA GRIP CLEAR Waterproofing Hydrostatic Coating

ULTRA GRIP CLEAR™

#5850-1 (1 Gallon)        #5850-5 (5 Gallon)

Datasheet

ULTRA GRIP™ CLEAR is a clear high-gloss, high-performance commercial grade, concrete & masonry waterproofing coating for floors and walls and decorative surfaces. Waterproofing resin modified with flexible encapsulated polymers which penetrate into the masonry for the ultimate in waterproofing protection. This new technology has excellent penetration on porous surfaces and will resist up to 4 psi of negative or positive hydrostatic pressure, which is the equivalent of an 8.8 foot high wall of water. It will also reduce penetration by radon gas. ULTRA GRIP™ CLEAR is formulated with an environmentally friendly biocide to resist mildew growth. Conforms to ASTM D-7088 Resistance to Hydrostatic Pressure and ASTM D-6904 Resistance to Wind Driven Rain.

SPREAD RATE: 75-100 square feet per gallon

TECH DATA:     Solids by Weight: 31%         Solids by Volume: 31%       Weight per Gallon: 8.5 lbs.

ULTRA GRIP PLUS Waterproofing Hydrostatic Coating

ULTRA GRIP PLUS™

#5854-1 (1 Gallon)        #5854-5 (5 Gallon)

Datasheet

ULTRA GRIP™ PLUS is a bright extra white, smooth finish, high-performance industrial grade 15 year, concrete & masonry waterproofing coating. Waterproofing resin modified with flexible encapsulated polymers which penetrate into the masonry for the ultimate in waterproofing protection. This new technology has excellent penetration on porous surfaces and will resist up to 15 psi of negative or positive hydrostatic pressure, which is the equivalent of a 33 foot high wall of water. It will also reduce penetration by radon gas. ULTRA GRIP™ PLUS is formulated with an environmentally friendly biocide to resist mildew growth. Conforms to ASTM D-7088 Resistance to Hydrostatic Pressure and ASTM D-6904 Resistance to Wind Driven Rain.

SPREAD RATE: 75-100 square feet per gallon

TECH DATA:     Solids by Weight: 65%         Solids by Volume: 57%       Weight per Gallon: 12.0 lbs.

ULTRA GRIP SALTSHIELD Salt & Efflorescence Protective Coating

ULTRA GRIP SALTSHIELD™

#5851-1 (1 Gallon)        #5851-5 (5 Gallon)

Datasheet

ULTRA GRIP™ SALTSHIELD is a Concrete Protector that provides weatherproofing and protection against deterioration caused by deicing salt, household cleaners, gasoline, oil and efflorescence (powdery, white, salt-like deposits visible on masonry). The unique SALTSHIELD technology penetrates into concrete and masonry providing excellent resistance to efflorescence staining often visible on brick, block and poured concrete surfaces. ULTRA GRIP™ SALTSHIELD seals bare masonry surfaces against dusting, staining, surface cracking and pock marking.

Protects Against Road Salt, Weathering, Gasoline and Oil - Prevents Excessive Dusting, Surface Cracking and Pockmarking - Solidifies Masonry Surfaces for Top Coat - Minimizes Reoccurring Efflorescence - Primes Prior to Paint

Note: ULTRA GRIP™ SALTSHIELD is not for use on asphalt surfaces, silicone treated surfaces, or on any masonry surface subjected to hydrostatic pressure. Surfaces subjected to hydrostatic pressure should be treated with other ULTRA GRIP™ products that resist hydrostatic pressure.

SPREAD RATE: 400 square feet per gallon

TECH DATA:     Solids by Weight: 20%         Solids by Volume: 19%       Weight per Gallon: 8.5 lbs.

ULTRA GRIP DRY MIX Waterproofing POWDERED MASONRY COATING

ULTRA GRIP DRY MIX™

#5842-5 (35 lbs.)

Datasheet

ULTRA GRIP™ DRY MIX powdered masonry coating is formulated to fill and seal porous masonry walls against water, even under pressure, by becoming an actual part of the original surface. An aggregate type material, ULTRA GRIP™ DRY MIX is ideal as a base coat, as well as a finish coat. This economical waterproofer can be used inside or outside, above or below grade. This powdered form of ULTRA GRIP™ Masonry Coating is the perfect formula for surfaces with extreme efflorescence. It mixes easily with water to make an economical white masonry waterproofing coating.

Resists 10 PSI Hydrostatic Pressure - May be Applied to Slightly Damp Surfaces - Reduces Radon Gas Penetration - For use on Cisterns and Potable Water Tanks and Systems

SPREAD RATE: 210 square feet per 35 lbs.

TECH DATA:     Solids by Weight: 100%         Solids by Volume: 100%       Weight per Gallon: 22.5 lbs.

Select the Items that Apply and Let us Know How to Contact You:

Send Concrete & Masonry Sealers, Stains, Paints, Clears and Supplies Information

Send All of Nationwide's Products Information

Have a Salesperson Contact Me Via: AG00088_.gif (337 bytes)

Phone      E-Mail     US Mail

URGENT CONTACT REQUEST - Have a Salesperson Contact Me Immediately!

Contact Information: (*Signifies Required Field)

*Name

 

Title

Company

Address

Country

City

State

Zip

-

*Phone

 

Fax

*E-Mail

 

*  

          

Home Page ButtonWhat's New ButtonProduct List ButtonRequest Information ButtonOrders and Pricing ButtonForms List ButtonFrequently Asked Questions Button

NATIONWIDE's CONTACT INFORMATION:                    Business Hours: (M-F 8am-5pm EST)

Telephone: 941.753.7500     U.S. Toll Free: 1.800.423.7264      Fax: 941.753.1773 (24 Hour Dedicated Fax)

Manufacturing Excellence Since 1964

NATIONWIDE PROTECTIVE COATING MFRS., INC.

ENERGY STAR Partner

7106 24th Court East

Sarasota, Florida  34243 U.S.A.

E-mail: info@natcoat.net                 Directory of Sales Associates                  Web: webmaster@natcoat.net

Click for the BBB Business Review of this Manufacturers & Producers in Sarasota FL

EXCLUSIVITY: Some Nationwide Products are sold Exclusively by Dealers and/or Distributors in Select Areas and Regions.

LEAKS: Leaks resulting from acts of providence, owner or their agents, are not the responsibility of NPCMI and under no circumstances shall NPCMI be liable in any respects to the building, its occupants, its contents or for any consequential or incidental damages. Leaks are required to be repaired prior to the application of any coating and therefore are not covered under any warranty.

LABOR: Products Warranties are Limited to Material Only (see Limitations below), Labor is not included. Nationwide does not Warranty for Labor of any Kind.
LIMITATIONS: Any implied warranty, including warranty of fitness for a particular use or purpose, and warranty of merchantability, is limited in duration to the express warranty based on the Individual Product's Warranty, unless a shorter period is permitted by law. If no Warranty is stated for a specific product then the maximum warranty will be One Year from date of Purchase. If a Product has a specific Warranty and a Warranty was not applied for using a Warranty Registration Certificate, the maximum warranty will be One Year from Date of Purchase. NPCMI shall not be liable for incidental or consequential damages or for damage to the building, its contents, or its occupants. NPCMI's liability is limited to the reasonable replacement cost of product that has been fully paid for and shall be limited to defective product in the affected area only, whether any claim against it is based upon strict liability, negligence, breach of warranty or any other theory or cause of action. Venue in reference to any Product of Nationwide shall be Manatee County, Florida, U.S.A.
DISCLAIMER: Information presented on this Web Page or any other Web Page on Nationwide Protective Coating Mfrs., Inc. Web Site has been compiled by sources to be reliable, and is accurate and reliable to the best of our knowledge and belief, but is not guaranteed to be so.

Copyright ©1998-2016 NATIONWIDE PROTECTIVE COATING MFRS., INC.

www.nationwidecoating.com   -    www.nationwidecoatings.net    -   www.natcoat.net    -   www.acrylocoat.com

This Page was last updated on Wednesday, June 22, 2016